N7201A652E - 第108页

NPM- TT2 EJM1EE-MB-02 O-04 2-2-2 -17 Engineer mode 7 Compo- nent names Menu configur a tion 9 Measures the pickup height and position. Measures the origin offse t of Z-axis. Fourth step Unit rep lacement Measures the pic…

100%1 / 512
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-16
Measures XY-origin and the head
camera.
Obtains measurements required to
calculate the XY offset of the
placement range.
Calibration
First step
Measures the origin offset of Z-axis,
and obtains measurements required
to calculate the height offset of the
placement range.
Configures the origin offset of the
adjustment width.
Second step
Configures the parameter for load
control.
Sets a PCB stop position and
placement height offset.
Measures scan position offset, line
camera magnification and camera tilt.
Third step
(for the 3-nozzle head)
Corrects the height sensor.
Preparation
First layer Second layer Third layer Fourth layer
Sets the origin offset of the head θ-
axis and the multi- recognition
camera magnification.
Measures the offset value related to
split recognition.
(displayed when split recognition is set)
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-17
Engineer mode 7
Compo-
nent
names
Menu configuration 9
Measures the pickup height and
position.
Measures the origin offset of Z-axis.
Fourth step
Unit replacement
Measures the pickup height and
position offsets of the tray.
(tray only)
Calibration
Machine
menu
Checks the connection status of plug-
and-play on the machine.
Checks the PnP history.
Updates machine system software,
messages, recognition system
software, and kernels.
Checks the system software history.
Displays special options being
enabled.
Checks system software information.
Information PnP
Machine
Loads the common parameters
selected from LNB or the SD card.
Operating procedure
2-2-2
First layer Second layer Third layer Fourth layer
Measures the transcription position
offset height.
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-18
Checks firmware information.
Updates each firmware program set
to the machine.
Firmware
Checks the firmware history.
Checks feeder information.
Updates the firmware of each feeder.
Feeder
Preparation
First layer Second layer Third layer Fourth layer