N7201A652E - 第109页
NPM- TT2 EJM1EE-MB -02O-04 2-2-2 -18 Checks firmware information. Updates each firmware prog ram set to the machine. Firmware Checks the firmware history. Checks feed er informatio n. Updates the firmware of each feeder.…
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-17
Engineer mode 7
Compo-
nent
names
Menu configuration 9
Measures the pickup height and
position.
Measures the origin offset of Z-axis.
Fourth step
Unit replacement
Measures the pickup height and
position offsets of the tray.
(tray only)
Calibration
Machine
menu
Checks the connection status of plug-
and-play on the machine.
Checks the PnP history.
Updates machine system software,
messages, recognition system
software, and kernels.
Checks the system software history.
Displays special options being
enabled.
Checks system software information.
Information PnP
Machine
Loads the common parameters
selected from LNB or the SD card.
Operating procedure
2-2-2
First layer Second layer Third layer Fourth layer
Measures the transcription position
offset height.
NPM-TT2 EJM1EE-MB-02O-04
2-2-2-18
Checks firmware information.
Updates each firmware program set
to the machine.
Firmware
Checks the firmware history.
Checks feeder information.
Updates the firmware of each feeder.
Feeder
Preparation
First layer Second layer Third layer Fourth layer
NPM-TT2 EJM1EE-MB-02O-04
File
opera-
tion
Overview of file
operation
How to load and save
2-3-1-1
LNB(Line Network Box)
Loading production data(→P.2-3-3)
Loading machine parameter data
(→P.2-3-6)
Saving production
data
(→ P.2-3-4 )
Loading production data (→ P.2-3-3)
Loading machine parameter data → P.2-3-6)
Saving production data (→ P.2-3-4)
Saving machine parameter data(→ P.2-3-6)
SD
Card
Interior of the
machine
DGS
(Data Generation System)
(*another product)
NPM-TT2 configuration
(Main unit + option)
Parameter disk
Memory
Operating procedure
2-3-1