N7201A652E - 第135页

NPM- TT2 EJM1EE-MB-02 O-04 2-4-2 -4 ● Do not use a pallet whose resin block part is misaligned, deformed or damaged. Such a pallet may cause a malfunction or damage to the tray feeder body. Checks Warning label 8 3 Lock …

100%1 / 512
NPM-TT2 EJM1EE-MB-02O-04
Preparation of the tray
feeder 2
Setting the magazine to the tray feeder
2-4-2-3
6
Push in the magazine
Push it all the way inside until it touches the stopper.
Feeder type
Number of pallets that can be
mounted on the magazine
Single tray Up to 20 pallets on two
Operating procedure
2-4-2
5
Fold the handle
toward you
Handle
7
Make sure the
magazine is fixed
1
Prepara-
tions
before
produc-
tion
ACTIVATION
NPM-TT2 EJM1EE-MB-02O-04
2-4-2-4
●Do not use a pallet whose
resin block part is
misaligned, deformed or
damaged.
Such a pallet may cause a
malfunction or damage to
the tray feeder body.
Checks
Warning label
8
3
Lock the
magazine
Magazine
2
Rail
4
Place the magazine
rollers on the rails of
the tray feeder
Roller
Preparation
NPM-TT2 EJM1EE-MB-02O-04
Preparation of the tray
feeder 3
1
2
Removing the magazine from the tray feeder
2-4-2-5
4
3
Raise the stopper and pull the magazine out
until the magazine handle comes out
Release the clamp lever
after pulling it until the clamp
release lever is disengaged.
Lift up the front
handle and draw
out the magazine
until you can see
the other handle
Stopper
Hold both handles
and remove the
magazine
5
6
Operating procedure
2-4-2
Prepara-
tions
before
produc-
tion
ACTIVATION