N7201A652E - 第156页

NPM- TT2 EJM1EE-MB-02 O-04 Individu- al prepara- tion R eplacing the no zzle 4 2-5-2 -7 Operating procedure 2-5-2 A B C D E F 1 2 Nozzle 2D code recognition The nozzle 2D recognition is carr ied out, and its resul ts are…

100%1 / 512
NPM-TT2 EJM1EE-MB-02O-04
2-5-2-6
Preparation
1
1
A B C D E F
Nozzle setting (measurement value) screen
This is used to display the measurement value obtained when the nozzle check was carried out to check
the nozzle and its adherents.
The screens for 8-nozzle heads are used here as an example to illustrate; however, the same procedure is
also applicable to 3-nozzle heads.
<Measurement value> screen
The nozzle position
Pos.
B
The nozzle number
Nozzle No
C
The nozzle size In mm
Size X, Size Y
D
E
The nozzle size measured during nozzle check
In mm
Check result Size X, Size Y
F
The nozzle position offset measured during nozzle
check In mm
Check result NozzlePos X, NozzlePos Y
OK: No adherents
NG: With adherents
-: Not measured
Adh Check
A
NPM-TT2 EJM1EE-MB-02O-04
Individu-
al
prepara-
tion
Replacing the nozzle 4
2-5-2-7
Operating procedure
2-5-2
A B C D E F
1
2
Nozzle 2D code recognition
The nozzle 2D recognition is carried out, and its results are displayed on the screen.
This is used to prevent miss setting of the nozzles. At the start of automatic operation, the nozzle 2D code
recognition is carried out so as to detect a nozzle(s) being miss set.
The [2D code chk] and [Read value] buttons are active only when the nozzle 2D code recognition is ON in
the unit setting.
The screens for 8-nozzle heads are used here as an example to illustrate; however, the same procedure is
also applicable to 3-nozzle heads.
1
<2D code recognition result> screen
(All nozzles are returned to the changer,
and the 2D codes of all the nozzles
within the changer are recognized)
2
(2D code recognition results are displayed)
A
The nozzle changer number
Changer
B
The nozzle number in production data
Nozzle Name Prod. data
C
The barcode-scanned nozzle number
‘- - -(Hyphen)’:
Yet to be scanned
Failed to read
Yellow frame:
The nozzle number differs from the
one in production data.
Nozzle Name Bar code
+
NPM-TT2 EJM1EE-MB-02O-04
2-5-2-8
Preparation
D
E
Material
F
The barcode-scanned nozzle serial number
‘- - -(Hyphen)’:
Yet to be measured
Failed to read
Serial
The barcode-scanned extra nozzle information
‘- - -(Hyphen)’:
Yet to be measured
Failed to read
Other information
The barcode-scanned nozzle material
‘- - -(Hyphen)’:
Yet to be measured
Failed to read