N7201A652E - 第243页
4 Setting Change
NPM-TT2 EJM1EE-MB-03O-02
3-3-4
Defective components supplied from a tray feeder are ejected to an ejection pallet.
If the ejection pallet is full and the nozzle picks up ejected components during production, this message
appears.
Compo-
nent
supply
Ejection pallet
Operating procedure
3-3-4
■If the ‘Setting’ of the item below is ‘ON’,
1
1
Confirm the message, and
perform any of the followings
A
A
A
A
Tray supply
(→P.5-1-1 ‘Option setting’)
■[Machine] - [Setting] - [Tray] - [Option] screen
■If the ‘Setting’ of the item below is ‘OFF’,
If the ejection pallet is full, it moves to the refill section: therefore you replace the
tray. (→P.3-3-3 ‘Tray replacement (tray feeder)’)
the ejection pallet is full, the machine stops in error; therefore you replace the
magazine.
(→P.2-4-2-5 ‘Removing the magazine from the tray feeder’)
4 Setting Change
NPM-TT2 EJM1EE-MB-04O-03
Data
editing
4-1-1-1
You can check or edit the data related to production.
Overview of data edit
Operating procedure
4-1-1
●For detail of parameters, (→ Chapter 5 ‘PCB EDIT’ in [NPM-DGS] Operating Instructions)
If the data is modified while LNB is connected, it is automatically uploaded to LNB.