N7201A652E - 第26页

NPM- TT2 EJM1EE-SF-01N-05 C W ar ning la bels 1 Danger labels 1-2 -1 1-2 Follow the instruction s on labels on the locations below. If it has come off, place an order with us for it, referring to its label No. in the Par…

100%1 / 512
NPM-TT2 EJM1EE-SF-01N-05
To prevent
injury or
electric shock…
1-1-8
Observe the precautions
described in the Product’s
[Material Safety Data Sheet
(SDS)] (Separate volume)
(Cause of injury or damage by chemical
substances)
●See the separate Material Safety Data
Sheets (SDS).
Wear a cloth hat or helmet
and protective goggles
during maintenance work
(Risk of injury)
●Motor or control boxes.
Handle the feeder carefully
when carrying it
(Risk of injury/backache due to dropping)
●Handle properly in accordance with the
manual.
Do not apply any impact to
motors or other electrical
equipment
(Risk of electric shock, cause of electrical
leakage)
●Motor or control boxes.
Do not climb on equipment,
peripheral devices and
moving parts
(Cause of damage by load or injury by
failing or being stuck in the equipment)
● Covers, the feeder cart.
Be sure to observe the following
Do not put any
objects around
emergency stop
switches
(Risk of an accident due to being
unable to press the switch to stop the
machine in case of emergency)
Confirmation
CAUTION
NPM-TT2 EJM1EE-SF-01N-05
C
Warning labels 1
Danger labels
1-2-1
1-2
Follow the instructions on labels on the locations below.
If it has come off, place an order with us for it, referring to its label No. in the Parts List; then, put the new one
on the proper location.
■NPM-TT2 main unit (Common in front and rear single tray feeder
specification and front and rear feeder cart specification)
Front side
On the right edge of
the feeder table cover
On the right edge of
the feeder table cover
PD0101M1
1-2-1
Single tray feeder coupling part
(13-slot supply unit)
PD0101M1
Front side
NPM-TT2 EJM1EE-SF-01N-05
1-2-2
1-2-1
■Feeder table cover unit (Front and rear feeder cart specification)
Front side
At the center of the feeder
table over
PD0101M1
At the center of the feeder
table cover
On the left edge of the feeder
table cover
Confirmation