N7201A652E - 第333页
NPM- TT2 EJM1EE-MB-04 O-03 + 5 5 4-2-7 -2 6 Choose height action ■ T o check the nozzle height when a component is placed on a PCB ■ T o check the nozzle height for transcription ● It is available only if the transcripti…
NPM-TT2 EJM1EE-MB-04O-03
Produc-
tion data
teaching
Placement/pickup
transcription height check
2
3
4-2-7-1
Explains how to check nozzle height visually during mount, pickup and transcription by operating X-, Y-, Z-
axis of the placement head.
●Perform on both and .
2
1
1
15
Choose a recognition
method
Operating procedure
4-2-7
4
3
4
Perform steps from through
in (P. 4-2-4)
NPM-TT2 EJM1EE-MB-04O-03
+
5
5
4-2-7-2
6
Choose height action
■To check the nozzle height
when a component is placed
on a PCB
■To check the nozzle height for
transcription
●It is available only if the transcription
function is enabled.
A
( is displayed)
■To check the nozzle height
when a component is picked
up from the feeder
+
7
●Visually check the nozzle height.
8
+
Confirm the message
(Z-axis moves to origin)
8
Ｓｅｔｔｉｎｇ
change
A6
7
9
6
7
9
9
NPM-TT2 EJM1EE-MB-04O-03
Produc-
tion data
teaching
Pickup position learning
teach 1
1
+
●Perform on both and .
3
Choose the data to teach
(The head camera moves to the
pickup position and a component
image is displayed)
2
2
4-2-8-1
●Automatic teach is available only for a
component of which tape width is 8mm or 12mm
and having pickup position automatic teach.
■To automatically teach
+
Operating procedure
4-2-8
1
The offset value performed by pickup position learning during production can be checked per feeder
address. If there is any problem on the learning value, teaching the position.
3
A
A
(Recognition teach starts and the result
is displayed in )