N7201A652E - 第339页
NPM- TT2 EJM1EE-MB-04 O-03 4-2-9 -3 Ｓｅｔｔｉｎｇ change 1 2 Set a PCB on the PCB entrance 1 Choose a teach ing mode ● The descriptio n below assumes to be chosen ● Perform on both and . T eaching with component (measuring met…
NPM-TT2 EJM1EE-MB-04O-03
4-2-9-2
Produc-
tion data
teaching
Placement coordinates
teach 2
Operating procedure
4-2-9
Measurement
method
Button Component Electrode on the PCB
One point
Two points
Four points
Choosing a measurement position
Measures the selected position to calculate the center coordinates of a component or an electrode on the PCB.
■Setting screen of the measurement position
■Measurement method and position button
Measure 1
Measure 3
Center
Measure 1
Measure 3
Center
Measure 2
Measure 4
Measure 2
Measure 4
Measure 2Measure 3
Measure 1Measure 4
Tape flow direction
+
-
+
-
+
-
+
-
+
-
+
-
Tape flow direction
Tape flow direction
Tape flow direction
Tape flow direction
Measure 2
Measure 3
Measure 1Measure 4
Tape flow direction
NPM-TT2 EJM1EE-MB-04O-03
4-2-9-3
Ｓｅｔｔｉｎｇ
change
1
2
Set a PCB on the PCB entrance
1
Choose a teaching mode
●
The description below
assumes to be chosen
●Perform on both and .
Teaching with component (measuring method: 1 point) 1
NPM-TT2 EJM1EE-MB-04O-03
4-2-9-4
Produc-
tion data
teaching
Placement coordinates
teach 3
Operating procedure
4-2-9
3
+
4
4
A
B
A B
Once an action starts, the button changes to “Stop”.
The head moves to the next coordinates and after it
stops and the time set on Teach image confirm
*1)
has
elapsed, it automatically moves to the next coordinates.
The action is repeated until the last coordinates
Press the [Stop] button on the coordinate you want
perform teaching.
*1) (→ 5-1-2
-2 “Teach image confirm”)
If you press this button, the head stops on the
coordinate and you can perform teaching.
Once an action starts, the button changes to
“Moving”.
Pressing the [Moving] button starts moving from
next coordinates.
●Movement also stops by pressing the [STOP]
key. However, if independent placement is
performed, the machine stops as single stop.
Teaching with component (measuring method: 1 point) 2
3