N7201A652E - 第389页

NPM- TT2 EJM1E E-MB-05O-05 5-1-1 -12 System administration Setting information 1 1 No. Item name Function when [ON] is selected 1 Tray Pts-collation (option) If trays containing any parts different from those in the prod…

100%1 / 512
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-11
Setting information 10
Unit
setting
Option setting 6
Operating procedure
5-1-1
● Default ：OFF
■ Feeder
No. Item name Function when [ON] is selected
52
Display RecogData
check after
transferring
Check production data when production start if there are parts becoming
[Transfer after recognizing] display the error and quit the production.
53
Feeder free arrange
in production
If this parameter is ON feeder free arrange will be executed when the feeder
arrangement is changed in production or components are empty.
54
Remain writing
specified by upper
system
The remains specified in outside parts collation are written into feeder. And
when running starts the remains collated by upper system will be written
automatically.
55
Return the parts
when teaching
It is possible to return the parts to the pickuped position after teaching an
emboss or tray parts.
56
Thin single feeder set
solution
It is possible that the feeder top interferes with the picking up nozzle when set
the thin feeder. Please set to ON because it is possible to execute the
operation of set / remove frequently in production. If set to ON when the thin
feeder that the components empty occurred the tact time is low because the
pickup prepare descent action isn't executed.
57
Continue pick-up at
tape-end
When tape-end is detected on radial feeder continue to pick-up without part
exhaust stop.
58
Mount point interlock
judge (front side)
When it is ON judge the supply component empty by mount point and
execute the component supply waiting according to the verification. Pickup
error won't become component empty. The splicing isn't corresponded.
59
Mount point interlock
judge (rear side)
When it is ON judge the supply component empty by mount point and
execute the component supply waiting according to the verification. Pickup
error won't become component empty. The splicing isn't corresponded.
60
Product continue
when feeder error
rate over
When it is ON the feeder error rate over occurs the MC doesn't stop right
away it will stop after mounting the parts from other feeders which can be
mounted. Press the feeder confirm button and resume the production.
61
Pickup position auto
teach Lamp value
fixed
When it is ON if the lamp value is fixed execute the pickup position teach.
When it is OFF adjust the lamp value and execute the pickup position teach
at the same time.
62
Tape component auto
supply (front side)
When the option is OFF disable the tape component auto supply function of
auto load feeder. When the option is ON enable the tape component auto
supply function of auto load feeder.
63
Tape component auto
supply (rear side)
When the option is OFF disable the tape component auto supply function of
auto load feeder. When the option is ON enable the tape component auto
supply function of auto load feeder.
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-12
System
administration
Setting information 11
No. Item name Function when [ON] is selected
1
Tray Pts-collation
(option)
If trays containing any parts different from those in the production data
downloaded to the machine are loaded, the interlock function of the machine
is activated, disabling production from being continued automatically.
2 Tray auto sort
Rearranges the pallets judged to have been loaded in wrong positions
(detected by parts collation via RIFD) to their correct positions according to
the production data.
3
Send require sorted in
tray
Uses the loaded stock trays in order from top to bottom.
4
Part remainder
number warning
Displays a warning message when “Feeder remainder number warning
length” in “Action parameters” is reached.
5
Tray stock Auto.
change
When the top pallet position of the stock tray is emptied, a lower pallet
containing the same parts will be moved to the position during parts supply.
6
Tray outside parts
collation
(option)
Enables tray feeder collation by the customer’s parts collation system.
When replenishing parts after a parts empty error, this option inquires of the
parts collation system whether collation has done. If collated, parts
replenishment will be completed to continue production. If not collated, parts
replenishment is considered to be unfinished and production will be stopped.
7
Make tray counter
changeable
Enables the tray counter to be only after production changeover until the
start of the first production.
8
All arranged
components supply
target
Allows loading of trays that contain any parts registered in the arrangement
list.
9
During the production
the tray magazine
shutter is off
Keeps the magazine shutter closed during production.
● Default ：OFF
■ Tray
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-13
Setting information 12
Unit
setting
Option setting 7
Operating procedure
5-1-1
No. Item name Function when [ON] is selected
10
Tray pickup order Y
direction change
(front)
Picks up tray parts (front side) in order in the longitudinal direction (Y
direction).
11
Tray pickup order Y
direction change
(rear)
Picks up tray parts (rear side) in order in the longitudinal direction (Y
direction).
12
Return the parts
when teaching
Returns the tray parts used for teaching to their original positions after
teaching.
This enables recognition test for all the parts on the pallet after teaching.
13
RFID tray remain
correspond
Holds the parts remainder in the memory of pallets when RFID-supported
tray feeder is used.
14
No tray remain RFID
load confirm
No confirmation dialog for loading parts remainder is displayed when RFID-
supported tray feeder is used.
15
Do vacuum error
check before tray
action
Sets the tray change timing after checks component pickup by the vacuum
sensor before changing trays during production.
16
Import tray out parts
collation pickup
position
When “Tray outside verification” is used for remain management, Remain
import button is available on the Arrange – Tray arrangement screen.
17
Product change tray
remain zero
Sets the tray remain count to 0 (parts empty) when component name differs
after changeover.
When this option is OFF, default value is set for the tray remain count.
18
RFID serial tray
component verify
Based on the pallet serial number arrangement written in the RFID tray pallet,
the LNB is checked for any misloading. Link the pallet serial numbers and
components on the PanaCIM in advance. Host system option is required to
connect to PanaCIM.
● Default ：OFF
■ Tray