N7201A652E - 第391页

NPM- TT2 EJM1E E-MB-05O-05 5-1-1 -14 Setting information 13 No. Item name Function w hen [ON] is selec ted 1 One Side Mark Recog When a part of recognition mark on PCB is hidden beh ind the conveyo r rail, this option en…

100%1 / 512
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-13
Setting information 12
Unit
setting
Option setting 7
Operating procedure
5-1-1
No. Item name Function when [ON] is selected
10
Tray pickup order Y
direction change
(front)
Picks up tray parts (front side) in order in the longitudinal direction (Y
direction).
11
Tray pickup order Y
direction change
(rear)
Picks up tray parts (rear side) in order in the longitudinal direction (Y
direction).
12
Return the parts
when teaching
Returns the tray parts used for teaching to their original positions after
teaching.
This enables recognition test for all the parts on the pallet after teaching.
13
RFID tray remain
correspond
Holds the parts remainder in the memory of pallets when RFID-supported
tray feeder is used.
14
No tray remain RFID
load confirm
No confirmation dialog for loading parts remainder is displayed when RFID-
supported tray feeder is used.
15
Do vacuum error
check before tray
action
Sets the tray change timing after checks component pickup by the vacuum
sensor before changing trays during production.
16
Import tray out parts
collation pickup
position
When “Tray outside verification” is used for remain management, Remain
import button is available on the Arrange – Tray arrangement screen.
17
Product change tray
remain zero
Sets the tray remain count to 0 (parts empty) when component name differs
after changeover.
When this option is OFF, default value is set for the tray remain count.
18
RFID serial tray
component verify
Based on the pallet serial number arrangement written in the RFID tray pallet,
the LNB is checked for any misloading. Link the pallet serial numbers and
components on the PanaCIM in advance. Host system option is required to
connect to PanaCIM.
● Default ：OFF
■ Tray
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-14
Setting information 13
No. Item name Function when [ON] is selected
1 One Side Mark Recog
When a part of recognition mark on PCB is hidden behind the conveyor rail,
this option enables recognition with visible area of the mark.
2
Detect mark
appropriate determine
Prevents false detection of marks in the following cases:
(1) Uneven luster in area other than mark
(2) Land patterns open on one side
(3) Similar shape patterns other than mark
(4) Thru-holes of similar size other than mark
3
Bad mark recognition
judge value is variable
Uses the criterion value in the bad mark information to judge the bad mark
recognition for production boards.
4
Recognition image
save(During mark
recognition)
Saves the image of mark recognition regardless of the result (OK/NG).
5
Recognition image
save(During pickup
position recognition)
Saves the image of pickup position recognition regardless of the result
(OK/NG).
No. Item name Function when [ON] is selected
1
Save recognize
screen in time
Saves all images of the parts for which “Force to save the recognition OK
image” has been set in the production data, regardless the result of
recognition.
2
Micro parts takeout
detection
Recognizes the end of nozzle by the recognition camera and makes checks
by the vacuum sensor after mounting a part. If “part takeout” has occurred,
“mount error” is displayed.
3
Drop detect before
ejecting
Checks the pickup state before putting the component into the ejection box.
If not picked up, the machine stops due to an error.
4
Drop detect before
ejecting (pickup error)
Adds the parts of pickup error to those to be subject to Drop detect before
ejecting.
5
Drop detect before
ejecting (recognition
ANS compare)
When the result of recognition before ejecting does not agree with the result
of recognition after pickup, the machine stops due to an error.
6
Drop detect before
ejecting (multiple
pickup)
When the result of recognition after pickup is multiple pickup and the result of
recognition before ejecting is other than multiple pickup, the machine stops
due to an error.
7
Parts data reflect
during parts thickness
range error
When a part thickness range error has occurred during production, a
confirmation dialog is displayed asking whether or not to add the part
thickness offset to the part thickness in the part data.
● Default ：OFF
■ Head camera
● Default ：OFF
■ Recognition camera
System
administration
NPM-TT2 EJM1EE-MB-05O-05
5-1-1-15
Setting information 14
Unit
setting
Option setting 8
Operating procedure
5-1-1
No. Item name Function when [ON] is selected
1
Measure by the
height sensor (front)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting.
2
Measure by the
height sensor (rear)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting.
● Default ：OFF
■ Height sensor
No. Item name Function when [ON] is selected
1
Over judge input
again
When inspection by the inspection head has resulted in NG, this option
allows judgment (OK/NG) for the NG component to be input again on the
Over judge screen.
● Default ：OFF
■ Inspection head