N7201A652E - 第494页

NPM- TT2 EJM1E E-MB-06O-04 Specifi- cation 6-1-5 -4 Operating procedure 6-1-5 Item Descriptions Supported sticks Supported parts (Unit : mm) Ws (Stick width) Ls (Stick length) Hs (Stick height) Min - 300 - Max 34 600 28 …

100%1 / 512
NPM-TT2 EJM1EE-MB-06O-04
6-1-5-3
At
a glance
Auto load feeder
Feeder type
Tape
width
(mm)
Type
Reel
diameter
*1）
Installa-tion
pitch
(mm)
Max.
depth of
boss
(mm)
Maximum
number of
reels
being
installed
*6
)
Single tray feeder
+13-slot supply unit coupled
Maximum number of reels
being installed
*2)
Feed pitch (1 pitch = 4 mm)
0.250.512345678 91011121314
8 mm
Thin type auto
load F
*4）
8 Paper
Small 10.5
-
120 52
●
1mm
●●
Large 10.5 60 26
*1)
Small reel: φ178 mm, Large reel: φ 178 mm to φ 382 mm
*2) Maximum number of reels being installed when the single tray feeder is coupled with the 13-slot supply
unit.
*3) Two small reels can be set.
Small and large reels cannot be set in the same slot of the reel container.
*4) When the thin type auto load feeder is installed, “Attachment for thin type auto load feeder” is required
for each slot.
●Common to NPM series and AM100.
NPM-TT2 EJM1EE-MB-06O-04
Specifi-
cation
6-1-5-4
Operating procedure
6-1-5
Item Descriptions
Supported
sticks
Supported
parts
(Unit: mm)
Ws
(Stick width)
Ls
(Stick length)
Hs
(Stick height)
Min - 300 -
Max 34 600 28
*1)
Intelligent stick feeder
*1) Maximum stick height which can be supported by a feeder. Use it followed by the machine, head
configuration and nozzle restrictions.
*2) Even if the dimensions fall within the specification dimensions, some parts may not be used depending
on chip and stick shapes.
e.g.: In case bending rigidity of the stick is too high to install it to the feeder.
In case parts do not flow smoothly and get stuck in the middle, even though a stick is tilted.
*3) About special parts, we will provide samples. Extra cost is required for the special parts.
(Unit: mm)
Ws
(Stick width)
Ls
(Stick length)
Hs
(Stick height)
Min - 300 -
Max 34 600 28
*1)
(Unit: mm)
Ws
(Stick width)
Ls
(Stick length)
Hs
(Stick height)
Min - 300 -
Max 34 600 28
*1)
■Standard
*2)
■Special
*3)
Other than standard chip type and dimension range, a stick within the following
dimensions may be applicable depending on a chip and stick shape.
Connector
Component/tray
specifications Intelligent
feeder specifications 3
NPM-TT2 EJM1EE-MB-06O-04
6-1-5-5
At
a glance
Intelligent stick feeder
*1) The maximum number of feeders installed when the tray feeder (option) is coupled.
*2) The maximum number of feeders installed when feeder carts (option) are coupled to all stages.
*3) Only 13-slot fixed supply unit can be installed. It can be installed to slot No. 19 to 30.
Feeder type
Installation
pitch
(mm)
Maximum number
of feeders
installed when
one single tray
feeder (option) is
coupled
*1)
Maximum number
of feeders
installed when
two single tray
feeder (option)
are coupled
*1)
Maximum number
of feeders
installed when
the feeder carts
(option) are
coupled to all
stages
*2)
Single stick feeder 42 20 12 28
3-rows stick feeder 84 10 6 14
Stackable stick feeder
(S size)*3)
42 12 12 12
Stackable stick feeder
(L size)*3)
84 6 6 6