N7201A652E - 第495页

NPM- TT2 EJM1E E-MB-06O-04 6-1-5 -5 At a glance Intelligent stick feeder *1) The maximum number of feeders installed w hen the tray feeder (option) is coupled. *2) The maximum number of feeders installed when feeder cart…

100%1 / 512
NPM-TT2 EJM1EE-MB-06O-04
Specifi-
cation
6-1-5-4
Operating procedure
6-1-5
Item Descriptions
Supported
sticks
Supported
parts
(Unit: mm)
Ws
(Stick width)
Ls
(Stick length)
Hs
(Stick height)
Min - 300 -
Max 34 600 28
*1)
Intelligent stick feeder
*1) Maximum stick height which can be supported by a feeder. Use it followed by the machine, head
configuration and nozzle restrictions.
*2) Even if the dimensions fall within the specification dimensions, some parts may not be used depending
on chip and stick shapes.
e.g.: In case bending rigidity of the stick is too high to install it to the feeder.
In case parts do not flow smoothly and get stuck in the middle, even though a stick is tilted.
*3) About special parts, we will provide samples. Extra cost is required for the special parts.
(Unit: mm)
Ws
(Stick width)
Ls
(Stick length)
Hs
(Stick height)
Min - 300 -
Max 34 600 28
*1)
(Unit: mm)
Ws
(Stick width)
Ls
(Stick length)
Hs
(Stick height)
Min - 300 -
Max 34 600 28
*1)
■Standard
*2)
■Special
*3)
Other than standard chip type and dimension range, a stick within the following
dimensions may be applicable depending on a chip and stick shape.
Connector
Component/tray
specifications Intelligent
feeder specifications 3
NPM-TT2 EJM1EE-MB-06O-04
6-1-5-5
At
a glance
Intelligent stick feeder
*1) The maximum number of feeders installed when the tray feeder (option) is coupled.
*2) The maximum number of feeders installed when feeder carts (option) are coupled to all stages.
*3) Only 13-slot fixed supply unit can be installed. It can be installed to slot No. 19 to 30.
Feeder type
Installation
pitch
(mm)
Maximum number
of feeders
installed when
one single tray
feeder (option) is
coupled
*1)
Maximum number
of feeders
installed when
two single tray
feeder (option)
are coupled
*1)
Maximum number
of feeders
installed when
the feeder carts
(option) are
coupled to all
stages
*2)
Single stick feeder 42 20 12 28
3-rows stick feeder 84 10 6 14
Stackable stick feeder
(S size)*3)
42 12 12 12
Stackable stick feeder
(L size)*3)
84 6 6 6
NPM-TT2 EJM1EE-MB-06O-04
Nozzle specifications 1
6-1-6-1
This machine is equipped with the standard nozzles in each head, supporting many different components.
Common to NPM series.
Operating procedure
6-1-6
Specifi-
cation
8-nozzle head
Nozzle
No.
Shape (mm)
Target
components
(Ex.)
225C
225CN
0603R, C
230C
230CN
1005R, C
1608R, C
240C
240CN
3216R, C
4532R, C
TAN-X,B,C,D
Al electrolytic-
A,B,C
185
185N
SOP
QFP
PLCC
BGA
to 18
× 18 mm
Nozzle
No.
Shape (mm)
Target
components
(Ex.)
140
140N
TAN-D
AI electrolytic-
D
SOP
SOJ
PLCC
CSP
226C
226CN
0603R, C
1005R, C
235C
235CN
1608R, C
2012R, C
3216R, C
SS-Mini Tr, Di
S-Mini Tr, Di
203Z
203ZN
0402R, C
199
199N
SOP
QFP
PLCC
BGA
to 32
× 32 mm
●Even though above nine types are standard for
nozzles for 8-nozzle head, they are available as
nozzles for 8-nozzle head in the CM series.
13.8
6
1.5
0.3
13.8
10
1
1
0.1
6
1234
5678
PCB recognition
camera
NOTICE
1.5
13.8
0.3
0.45
0.32
0.17
●For the nozzle No. including ‘C’, the nozzle tip is made of ceramic.
●For the nozzle No. including ‘N’, the 2D code is provided on the nozzle flange supporting the 2D code
recognition in the NPM series.
.