N7201A652E - 第71页

NPM- TT2 EJM1EE-MB -02O-04 1 2-1-1 -2 Stopping the machine Return all axes to the origin (→[Oper ating procedure] P.5-2-1) ● Lock the machine after turning OFF the main power switch. 2 Preparatio n

100%1 / 512
NPM-TT2 EJM1EE-MB-02O-04
SERVO
ON
3
●Wait for 2 to 3 minutes after turning
ON the main power switch. (Once
the system starts, the screen below
is displayed)
2
2-1-1-1
●Keep the main power switch in
the OFF state for over 10 seconds
when turning it ON.
The emergency stop switch is released.
●Make sure that any risk
or trouble is eliminated
and then turn the
emergency stop switch
right to release it.
1
No foreign material is present on the conveyor or the
feeder table.
The safety covers are closed.
1
3
4
Front side
5
The main pressure is appropriate.
(→[Maintenance] P.4-1-1)
Basic
opera-
tion
Starting and stopping
the machine
Operating procedure
2-1-1
Starting the machine
OFF
SERVO
Checks before operation
The servo switch is turned OFF.
2
SERVO
ON
NPM-TT2 EJM1EE-MB-02O-04
1
2-1-1-2
Stopping the machine
Return all axes
to the origin
(→[Operating procedure]
P.5-2-1)
●Lock the machine after
turning OFF the main
power switch.
2
Preparation
NPM-TT2 EJM1EE-MB-02O-04
2-1-2-1
Basic
opera-
tion
Mode selection
Operating procedure
2-1-2
■Operator mode screen
■To switch to Operator mode
1
Operator
mode