N7201A652E - 第73页
NPM- TT2 EJM1EE-MB -02O-04 2-1-2 -2 ■ T o switc h to Engineer mode 1 Select Engineer mode 2 Input the passw ord 3 2 3 ● To set the passwo rd (→P.2-1-4) ● The passwo rd is not set before shipment. Preparatio n 1 ■ Enginee…
NPM-TT2 EJM1EE-MB-02O-04
2-1-2-1
Basic
opera-
tion
Mode selection
Operating procedure
2-1-2
■Operator mode screen
■To switch to Operator mode
1
Operator
mode
NPM-TT2 EJM1EE-MB-02O-04
2-1-2-2
■To switch to Engineer mode
1
Select
Engineer mode
2
Input the password
3
2 3
●To set the password (→P.2-1-4)
●The password is not set before
shipment.
Preparation
1
■Engineer mode screen
Engineer
mode
NOTE
If you leave from the machine, change the mode from Engineer mode to
Operator mode.
●When you set the time on [Op. mode auto. log off time[min]](→P.5-1-2-2),
the machine can be locked with password after predetermined time.
NPM-TT2 EJM1EE-MB-02O-04
Operating procedure
2-1-3
Select an operation mode on the default screen displayed when the machine is started up.
Insert a key disk
●Insert the SD card (the attached key
disk) to change the password into the
SD card drive.
1
2
3
4
Type in your password
2-1-3-1
4
■If you do not switch to Engineer mode
The default operation
mode setup 1
2
3
Basic
opera-
tion