User Manual SIPLACE Linear Dipping Unit 2 X - 第10页
1 Introduction 1.2 Important notes on this user manual 10 User Manual SIPLACE Linear Dipping Unit 2 X 05/2020 1.2.5 Further information 1.2.5.1 How to get information If you have any questions about this manual or requir…
1 Introduction
1.2 Important notes on this user manual
User Manual SIPLACE Linear Dipping Unit 2 X 05/2020 9
1.1.8 Use of original SIPLACE accessories and spare parts
Only use original spare parts and authorized accessories. The use of other parts will affect safety
and will invalidate the liability for any consequential damage.
1.2 Important notes on this user manual
1.2.1 Contents and filing of this user manual
This user manual contains basic information that must be observed when setting up, operating and
maintaining the device. The service engineers, qualified staff, operators and users plus system
owner must therefore read it before commencing installation and commissioning. The manual must
be kept permanently accessible where the device is used.
In addition, the system owner has to ensure that all members of the staff have fully understood the
contents of the user manual.
1.2.2 Danger notes
WARNING
Danger notes
► A thorough knowledge of the relevant part of this user manual is required before carry-
ing out any work on the LDU.
► All work must be carried out by appropriately trained and qualified personnel.
► All warnings, cautions and hazard notes must be observed.
► Please also read and follow the instructions in the chapter 2 "Operational
safety" [}11] of the user manual.
1.2.3 Manufacturer's/Supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory
nature only and do not contain any contractual conditions or guaranties. The liability and obliga-
tions assumed by ASM Assembly Systems GmbH & Co. KG can be found exclusively in the relev-
ant contract agreement concerning the supply of the device described in this manual. This applies
in particular to all statements regarding performance or service life and the agreed liability for faults
or defects. The provisions of the contract regarding the liability for faults or defect are neither exten-
ded nor restricted by any statements in this user manual.
1.2.4 Release history
Document
SIPLACE Linear Dipping Unit 2 X
User manual
Edition Amendments
07/2019 Revision and enhancements
Flux Level Sensor
Auto Cavity option
03/2020 Revision and enhancements
Adjust cavity depth
1 Introduction
1.2 Important notes on this user manual
10 User Manual SIPLACE Linear Dipping Unit 2 X 05/2020
1.2.5 Further information
1.2.5.1 How to get information
If you have any questions about this manual or require more information on specific topics, please
contact your local SIPLACE branch. Or contact us directly:
ASM Assembly Systems GmbH & Co.KG
Rupert-Mayer-Str. 44
81379 München
1.2.5.2 SIPLACE on the World Wide Web (WWW)
Log in to our SIPLACE® homepage at http://www.asm-smt.com.
You can choose between the German and English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here, you can
access special information about our placement systems, e.g.:
●
Technical documentation
●
Technical information
●
Spare parts lists
Registration for the MySIPLACE user group is very simple:
► Click on MyASM and then on Registrieren.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password.
2 Operational safety
2.1 Safety instructions
User Manual SIPLACE Linear Dipping Unit 2 X 05/2020 11
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.
2.1.2 Important notes on operational safety
The following points must be observed in order to maintain operating safety:
2.1.2.1 General information
► Operating safety is only guaranteed if the device is used as prescribed and in accordance with
the instructions in the user manual.
► Always follow any safety regulations specific to your country!
► Make sure that the warning labels are always clearly identifiable and always easily readable.
► Replace any damaged warning or notice labels. Replace any labels that are missing.
► The machine key for releasing the covers on the machine must be kept in a safe place where
it is only accessible to qualified personnel.
► If it is necessary to work on the machine and you do not have adequately trained personnel
within your operation, always call in a service engineer of ASM Assembly Systems
GmbH&Co.KG. ASM Assembly Systems GmbH & Co. KG does not accept liability for any
damage or consequential damage that is the result of unauthorized/incorrect work.