User Manual SIPLACE Linear Dipping Unit 2 X - 第6页
6 User Manual SIPLACE Linear Dipping Unit 2 X 05/2020 Contents
5User Manual SIPLACE Linear Dipping Unit 2 X 05/2020
Contents
4.16 Monitoring production.. 78
4.17 Refreshing the dipping medium.. 78
4.18 Logging off and removal.. 79
5 Cleaning.. 81
5.1 Cleaning agents and tools.. 81
5.2 Removing the parts to be cleaned.. 82
5.3 Cleaning the dipping components.. 85
5.4 Refitting the cleaned parts.. 85
6 User Manual SIPLACE Linear Dipping Unit 2 X 05/2020
Contents
1 Introduction
1.1 Module Description
User Manual SIPLACE Linear Dipping Unit 2 X 05/2020 7
1 Introduction
This user manual contains technical information and descriptions to operate the SIPLACE Linear
Dipping Unit 2 X (LDU 2 X).
1.1 Module Description
The LDU2X is a special feeder module that makes flux available in a pre-defined layer thickness.
Components can be dipped into the flux to improve their solderability. The LDU2X is set up on a
changeover table in the same way as any other X-feeder module and is controlled by the station
software and SIPLACE Pro (line software).
The LDU 2 X can be ordered in a special version, which provides the possibility to use a special
dipping plate with an adjustable cavity depth. This option allows a more flexible operation and also
may reduce the number of LDU 2 X units if multiple cavity depths are needed in one placement
task.
NOTICE
It is not possible to retrofit an Auto Cavity option to a standard LDU 2 X.
1.1.1 EU Declaration of Conformity
The products/devices described below conform to the regulations and standards listed in the EU
Declaration of Conformity provided.
Type: SIPLACE Linear Dipping Unit 2 X
Item no.: 00117012-xx
Type: SIPLACE Linear Dipping Unit 2 X Auto Cavity
Item no.: 00117018-xx
Manufacturer:
ASM Assembly Systems GmbH & Co.KG
Rupert-Mayer-Str. 44
81379 Munich
Germany
1.1.2 Correct Usage
The product may only be used for the application described in the catalogues and technical spe-
cifications i.e. for placement of SMD components and only in connection with the third party
devices and components recommended or approved by ASM Assembly Systems GmbH & Co. KG.
Any other use is deemed to be incorrect and not as prescribed.
In the case of incorrect usage, ASMAssembly SystemsGmbH&Co.KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Prescribed or correct usage includes the observance of all the instructions in the user manual.
The proper and safe operation of the product requires correct transportation, storage, installation
and assembly, plus careful, accurate utilization and servicing.
1.1.3 Incorrect Usage
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, non-prescribed usage is prohibited. If the product is not used as pre-
scribed, ASM Assembly Systems GmbH & Co. KG will not accept liability for any damage that may
occur and will not guarantee that the components will work properly and without problems.
Non-prescribed usage of the product includes the following examples:
●
Operation of the product with safety equipment deactivated or removed
●
Use of components that do not meet the permitted specification