CP-842E-842ME System Reference-SYS-CP842-10E - 第13页

Safety >> Safety Rules for All Machine Types SYS-CP842-1.0E 2-3 Do not remove safety switches. z Do not remove safety switches or disarm the safety func- tions. z Disarming the safety switches may result in injury …

Safety >> Safety Rules for All Machine Types

2-2

SYS-CP842-1.0E

2.2 Safety Rules for All Machine Types

DANGER

Do not approach moving parts during automatic or manual oper-

ation.

z Do not place hands or other body parts inside the machine

during automatic operation or positioning. Body parts or

clothing may be caught in the machine causing personal

injury.

WARNING

Do not operate the machine with the safety covers or doors

open.

z Do not leave covers or safety doors open, except during

adjustment.

z hen adjustments are completed, return the covers and

doors to their original (closed) position...

z When safety covers or doors are removed, body parts or

clothing may be caught in the machine causing personal

injury. Always be sure to replace the safety covers or

doors.

Always verify the position of the EMERGENCY STOP buttons

before operating the machine.

z Always be aware of the positions of the EMERGENCY

STOP buttons so that they can be pressed quickly in case

of an emergency.

Check the safety functions before starting operation.

z Before starting the machine check the operation of the

EMERGENCY STOP button, the safety switches on the

acrylic covers, the safety switch on the rear fence gate, the

optical sensors on the rear fence and all other machine

safety features.

z Contact a Fuji serviceman immediately if any of the safety

functions fails.

Safety >> Safety Rules for All Machine Types

SYS-CP842-1.0E 2-3

Do not remove safety switches.

z Do not remove safety switches or disarm the safety func-

tions.

z Disarming the safety switches may result in injury when

others unknowingly press the START button.

z Fuji does not take any responsibility when a machine is

disassembled without Fuji's permission, even if this

results in accidents or trouble.

Check that there is nobody inside the machine when working on

the machine with two persons or more.

z Verify that nobody is within or near the machine before

operating the machine. Operating the machine may cause

injury to the person who is carrying out maintenance.

[Example]

If one person moves the device table while another person is

exchanging a feeder, the latter may be injured.

Do not close the fence when someone is inside the fence.

z When the fence is opened, it is safe to approach the

machine. Closing the fence, however, will put anybody

working inside the fence in immediate danger when the

RESET or START button is pressed. Be sure to leave the

fence open when anyone is inside the fence.

Do not approach a machine that has stopped moving.

z There are times during automatic operation when the

machine may appear to have stopped while it is waiting

for a board, waiting for the next machine, reading marks,

transmitting data, etc. In such cases, once certain condi-

tions are fulfiled, the machine will begin moving again

automatically, so care should be taken. Only approach the

machine after the EMERGENCY STOP button has been

pressed. When the message "Ready" displays at the

machine display, the machine will begin to move once cer-

tain conditions are satisfied.

z Keep in mind that the machine will begin to move regard-

less of whether these conditions are satisfied intentionally

or inadvertently.

Resupply solder paste, glue and parts while the machine is in

manual mode.

z Never resupply solder, glue or parts during automatic

operation unless instructed otherwise. Body parts or

clothing may be caught in the machine causing personal

injury.

WARNING

Safety >> Safety Rules for All Machine Types

2-4

SYS-CP842-1.0E

Do not place hands near the main conveyor.

z Hands or other body parts may be caught in the machine.

Always turn the 200V power supply off when cleaning or lubricat-

ing the machine.

z When the 200V power supply to the machine is turned on,

the servo amps will be activated. In this condition the

machine may unexpectedly begin to move.

Do not insert or remove connectors while power is being sup-

plied to the machine.

z Removing or inserting connectors while power is supplied

to the machine may not only cause damage to the

machine, but may also cause electrical shock.

z Be sure to cut the power to the machine before inserting or

removing connectors.

Stay clear from the machine when it is being lifted.

z Never put hands or feet under the machine when the

machine is being raised by means of a jack or other device

for leveling or transport.

Do not look into the conveyor inlet or outlet and do not open the

cover. (Reflow oven)

z Do not look into the conveyor inlet or outlet and do not

open the cover.

[Example]

The UV light on the reflow oven may damage eyesight or

result in burns.

Exchange the halogen lamp only after it has cooled down.

z When turned on, halogen lamps will reach high tempera-

tures, resulting in skin burns when touched. To exchange

a halogen lamp, turn off the power and allow the lamp to

cool off sufficiently.

Do not wear gloves made of cloth when operating the machine.

z Rubber gloves will tear when caught by the machine and

prevent hands from being drawn into the machine. Gloves

made of cotton or similarly strong material may cause

hands to be drawn into the machine.

WARNING