CP-842E-842ME System Reference-SYS-CP842-10E - 第211页

System Installation and Upgrade >> System Installation SYS-CP842-1.0E 7-5 7.1.2 Inst alling the Operating System The System Software Recovery Media CD-RO M is used to install the system software. 1 At the exit dial…

System Installation

and Upgrade >> System Installation

7-4

SYS-CP842-1.0E

[Power] Screen

Specify the [Power] screen settings as shown below.

Power Savings: [Disabled]

Idle Mode: Off

Standby Timeout: Off

Auto Suspend Timeout: Off

Hard Disk Timeout: Disabled

Resume On time: [Off]

Resume time: [00:00:00]

Resume Date: [00/00/0000]

[BIOS] Screen

The [Bios] screen shows various types of information, but settings at this screen can-

not be changed.

[Boot] Screen

Arrange the order of the items as shown below. To change an items order, select the

item (highlighted), then use the [+] and [-] keys to move the item up and down, respec-

tively.

To avoid a startup from the floppy disk (in systems with a floppy disk drive), select

Removable Devices, then press [Shift] + [1] to enter an exclamation mark (!) in front of

Removable Devices as shown below.

! Removable Devices

ATAPI CD-ROM Drive

Hard Drive

Network Boot

[Exit] Screen

When the settings described above have been made, select the first item Exit Saving

Changes and press [Enter] key. Select Yes at the confirmation message to register the

settings.

System Installation

and Upgrade >> System Installation

SYS-CP842-1.0E 7-5

7.1.2 Installing the Operating System

The System Software Recovery Media CD-ROM is used to install the system software.

1 At the exit dialog box for the BIOS settings, insert the System Software Recov-

ery Media CD-ROM into the CD drive, then select [Yes] at the dialog box. When

the BIOS setting operation is ended in this manner (with CD-ROM inserted),

the system software installer is automatically started, and installation begins.

2 When the installer begins, the license information of the Easy-Restore used for

the system recovery displays together with the message, Strike a key when

ready at the bottom of the screen. Press the SPACE key to proceed. Press the

SPACE key three times to reach the end of the license information and the

installer.

When the operating system installation is complete, a dialog box displays ask-

ing you to reboot ([Reboot] button displays).

3 Do not select reboot yet because you must replace the System Software Recov-

ery Media with the machine control software CD-ROM first. (Proceed to next

section Installing the Machine Control Software.)

Note: Do not restart with the System Software Recovery Media CD-ROM inserted, as this

will reinstall Windows NT.

System Installation

and Upgrade >> System Installation

7-6

SYS-CP842-1.0E

7.1.3 Installing the Machine Control Software

1 With the reboot dialog box displayed (from the previous section), replace the

System Software Recovery Media CD-ROM with the machine control software

CD-ROM. Now you can reboot the system (press [ENTER] on the keyboard).

After rebooting, Windows NT is started, and the system installation starts auto-

matically.

Note: If rebooting occurs without the CD-ROM inserted, Windows NT starts, and the follow-

ing message displays: Cant find shortcut link which starts Setup.EXE. If this occurs,

click [OK] and insert the application CD-ROM. The installation starts automatically.

2 When installation starts, the [Setup] screen displays together with a Yes/No

confirmation message asking whether to proceed with the installation. Select

[Yes] to proceed to the product ID input screen.

3 Enter the product ID and click [Next].

At the confirmation dialog box which then displays, verify that the ID is correct.

If the ID is incorrect, click [No] to return to the product ID input screen. If the

ID is correct, click [Yes] to continue with the installation. The remainder of the

application installation is performed automatically.

4 A message displays when installation is completed. Remove the CD-ROM and

click [OK].

5 After restarting, Windows NT will start up first, and then the application soft-

ware will start up (if correctly installed). If the installation has failed, repeat

the installation from the beginning.