CP-842E-842ME System Reference-SYS-CP842-10E - 第41页

Machine System >> Basic Operation SYS-CP842-1.0E 4-5 4.1.2 Selecting a Production Program Production programs are held in the machin e background, or at the host. A program must be in the foreground to be used fo r…

Machine System >> Basic Operation

4-4

SYS-CP842-1.0E

Clearing an Error

There are two levels of error which can occur at the machine, emergency stop errors

and cycle stop errors.

Emergency Stop

If an emergency stop occurs, the 200V power supply to the servo system is cut, and the

machine stops immediately. Emergency stop errors are caused by actions such as

opening the safety doors (front or rear), tape leaf errors and pushing the EMER-

GENCY STOP button.

Cycle Stop

If a cycle stop occurs, the machine stops when the current cycle of the cam is complete

(power to the servo system is not cut). Cycle stop errors are caused by actions such as

vision related errors, air pressure errors and carrier loader system errors.

Procedure

1 If an error occurs, the following error screen displays, and the Ready ON button

is enabled.

2 Correct the problem which caused the error. There is a button for each error

which indicates the type of error. To display the details of the error, press the

error message button.

3 Press the READY ON to indicate that the cause of the error has been corrected.

4 If the cause of the error has been properly corrected, the START button is

enabled.

5 Press the START button to restart production.

Machine System >> Basic Operation

SYS-CP842-1.0E 4-5

4.1.2 Selecting a Production Program

Production programs are held in the machine background, or at the host. A program

must be in the foreground to be used for assembly. The production program at Cur-

rent Program is in the foreground, other programs held at the machine list under

Background Programs are in the background. You can select the production program

to be used in production by carrying out the following procedure or transmit straight

from the host to the machine foreground (refer to your host system documentation for

details of this procedure).

Procedure

1 With the machine booted up and the desired program already transmitted to the

machine, press [Program] at the [Main] screen.

The [Program] screen displays, showing a list of the all the programs currently

held at the machine.

Note: The production programs are held in the machines hard drive. The number of programs

which can be stored is limited only by the amount of hard disk space available. Scroll down

to view the full list of programs.

Machine System >> Basic Operation

4-6

SYS-CP842-1.0E

2 The [Sort Order/Find] function can alter of the order of the program list held at

the machine. It can also search the list by program name. To alter order of the

program list, select the type of ordering from the choices in the [Sort] section. To

display program names that contain a particular word string, select [Input] and

use the virtual keyboard to enter the word string. When finished, push the

[Enter/close] button.

Note: To display all programs again after using the search function, press [All] in the

[Sort Order/ Find] box.

3 Press [OK] after selecting the program to be used in production. The name of

the selected program now displays at “Current Program” (the machine fore-

ground).

4 Press [Close] to return to the [Main] screen.