CP-842E-842ME System Reference-SYS-CP842-10E - 第43页

Machine System >> Basic Operation SYS-CP842-1.0E 4-7 4.1.3 Modes of Running the Machine The machine has settings which allow the us er to set how the machine runs. These settings are divided into Operation modes an…

Machine System >> Basic Operation

4-6

SYS-CP842-1.0E

2 The [Sort Order/Find] function can alter of the order of the program list held at

the machine. It can also search the list by program name. To alter order of the

program list, select the type of ordering from the choices in the [Sort] section. To

display program names that contain a particular word string, select [Input] and

use the virtual keyboard to enter the word string. When finished, push the

[Enter/close] button.

Note: To display all programs again after using the search function, press [All] in the

[Sort Order/ Find] box.

3 Press [OK] after selecting the program to be used in production. The name of

the selected program now displays at “Current Program” (the machine fore-

ground).

4 Press [Close] to return to the [Main] screen.

Machine System >> Basic Operation

SYS-CP842-1.0E 4-7

4.1.3 Modes of Running the Machine

The machine has settings which allow the user to set how the machine runs. These

settings are divided into Operation modes and Production modes. The standard com-

bination of modes used during assembly is Operation set to Production, and Produc-

tion mode set to Automatic. The other modes facilitate testing of machine operation

and production programs.

Setting the Operation Mode

The machine has five modes of operation, Production, Idle, Idle operation with loading

Idle operation without pickup and Pass. These modes of operation have different pur-

poses as is explained below.

Production: This mode is used during assembly. Parts are picked

up, part inspection is performed, and the parts are

placed on the panel.

Idle: This mode is used primarily for adjustments and test

runs. Operation is identical to that which occurs in the

Production mode, except that panel changes and vision

processing do not occur. When using the idle mode,

there must be no feeders at the feeder pallets.

Idle operation with loading: This is the Idle mode with the addition of loader move-

ment performed by the loader. When using this mode,

there must be no feeders at the feeder pallets.

Idle operation without pickup:Operates in the same manner as the standard idle

mode except that pickup is not performed.

Note: Both Idle operation with loading and Idle operation without pick up can be selected at the

same time.

Pass: Pass mode is used when the machine is not used in cur-

rent production. In pass mode the machine simply acts

as a conveyor, moving the panel on to the next machine

in the line.

Procedure

1 Press [Operation] at the [Main] screen, the [Operation] screen displays.

2 Select the desired operation mode by pressing either [Production], [Idle] or

[Pass].

Production

Operation Mode

Pass

Idle

C7SS2003

Machine System >> Basic Operation

4-8

SYS-CP842-1.0E

3 When using idle mode with additional functions, select [Loader] and/or [No pick

up] in the “Loader 2”section. Both can be selected at the same time.

4 Press [Close] to return to the [Main] screen.

5 Press [Production] to enable the START button.

Setting the Production Mode

Production programs can be run in either Automaticor Step operation modes.

Automatic: Use Automatic for assembly. In this mode the machine operates

continuously, performing each of the sequences defined in the pro-

gram.

Step: Use Step to test the operation of the machine. In this mode the

machine performs one sequence at a time, and the START button

must be pressed to perform the next sequence.

Procedure

1 Press [Production] at the [Main] screen.

2 Select the mode of production in the Production Mode section.

3 Press [Close] to return to the [Main] screen.

Loader

Idle 2

No Pickup

C7SS2004