CP-842E-842ME System Reference-SYS-CP842-10E - 第91页

Machine System >> Editing Production Programs On t he Machine SYS-CP842-1.0E 4-55 Specifying A Sequence A sequence can be specified in th e following 3 ways. 1 By entering th e sequ ence number directly . A. Click …

Machine System >> Editing Production Programs On the Machine

4-54

SYS-CP842-1.0E

Sequence Search Screen

The sequence for which a simulation or test placement is desired is selected on this

screen.

Screen Button Explanations

A. [Sequence No.]: Displays a ten-key pad where the desired sequence number

(search object) can be entered.

B. [Reference Designator Search]: Displays a ten-key pad where the desired reference

designator (search object) can be entered.

C. [ZOOM+]: Zooms in and enables image scrolling, and sequence cursor

movement.

D. [Close]: Returns to either the simulation or the test placement screen

(returns to the screen from which this screen was accessed).

Display Item Explanations

1. [Monitoring Preview] Displays the panel position of the sequence number indicated

by the [Sequence No.] item (item A. above).

Specify the sequence number.

FUJI

ErrorOperator

JOG:X Y CAM

Servo CountGEMCCD Monitor

Sequence SearchFUJI_CP7_2001

Front

123

Sequence Number

ZOOM +

ZOOM -

Move Cursor

Reference

Designation Search

MIN

Set Switch

CP7S2010E

Machine System >> Editing Production Programs On the Machine

SYS-CP842-1.0E 4-55

Specifying A Sequence

A sequence can be specified in the following 3 ways.

1 By entering the sequence number directly.

A. Click the [Sequence No.] button to display a ten-key pad, then enter the

desired sequence number. If the modeling object is enabled, the part for

the specified sequence displays on the modeling object.

2 By entering a reference designator.

B. Click the [Reference Designator] button to display a ten-key pad, then

enter the search object reference designator. If the modeling object is

enabled, the part for the specified sequence displays on the modeling

object.

3 By moving the cursor to the desired position on the modeling object.

C. Click the [ZOOM+] button to enable the modeling object. The procedure

for specifying a sequence using the modeling object is explained on the fol-

lowing page (Sequence Search 2 Screen).

Machine System >> Editing Production Programs On the Machine

4-56

SYS-CP842-1.0E

Sequence Search 2 Screen

Click the [ZOOM +] button on the sequence search screen to zoom in (enlarge) on the

modeling object. The desired sequence can then be selected from the modeling object.

Screen Button Explanations

A. [Sequence Number]: Displays a ten-key pad where the desired sequence

number (search object) can be entered.

B. [Reference Designator Search]: Displays a ten-key pad where the desired reference

designator (search object) can be entered.

C. [] (Leftward cursor movement): If the part for the specified sequence is notdis-

played, this key changes the sequence number to that of the upper right part. If the

specified sequence part is displayed, this key changes the sequence number to that of

the part to the left. If there is no part to the left, the sequence number is changed to

that of the lower right part. If the sequence number of the lower left part is specified,

this key changes the sequence number to that of the upper right part again.

D. [] (Rightward cursor movement): If the part for the specified sequence is not dis-

played, this key changes the sequence number to that

of the upper right part. If the specified sequence part is

displayed, this key changes the sequence number to

that of the part to the right. If there is no part to the

right, the sequence number is changed to that of the

upper left part. If the sequence number of the top right

part is specified, this key changes the sequence number

to that of the bottom left part.

E. [Horizontal scroll box]: Scrolls through the modeling display area in the hori-

zontal direction. A drag-and-drop can be performed to

scroll to a desired position.

Specify the sequence number.

FUJI

Error

Operator

JOG:X Y CAM

Servo Count

GEMCCD Monitor

Search SequenceFUJI_CP7_2001

Front

Sequence

Number

Reference

Designator Search

C87

ZOOM +

ZOOM -

Move Cursor

Set Switch

CP7S2011E

C D H O