SOM-2080-001_w.pdf - 第112页
109 SOM-2080 1005-001 6.9 Automatic Setup Erroe ID Error Name, Description, Cause, and Remedy 49600c Support Pins/Jig detection Support pins/Jig were detected at the NA_W3 axis (Lane B). Remove the support pins/Jig from …
108
SOM-2080
6.9 Automatic Setup
1005-001
Erroe ID Error Name, Description, Cause, and Remedy
490724 Nozzle set-up
Failed in the nozzle change on the multi-functional head. Confirm the data in the
Stocker of the Placement Head/ Nozzle data.
-----
490725 Nozzle set-up
Time-out of Nozzle Setup.
Please start production again.
490801 Program -change linked operation
Program-change linked operation was not finished within appointed time.
-----
496001 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NB_W1 axis.
Remove the support pins/Jig from the backup base.
496002 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NB_W2 axis.
Remove the support pins/Jig from the backup base.
496003 Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NB_W1 axis.
Remove the support pins/Jig from the backup base.
496004 Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NB_W2 axis.
Remove the support pins/Jig from the backup base.
496005 Support Pins/Jig detection
Support pins/Jig were detected at the NB_W1 axis.
Remove the support pins/Jig from the backup base.
496006 Support Pins/Jig detection
Support pins/Jig were detected at the NB_W2 axis.
Remove the support pins/Jig from the backup base.
496007 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NA_W1 axis (Lane A).
Remove the support pins/Jig from the backup base.
496008 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NA_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
496009 Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NC_W1 axis (Lane A).
Remove the support pins/Jig from the backup base.
49600a Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NC_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
49600b Support Pins/Jig detection
Support pins/Jig were detected at the NA_W1 axis (Lane A).
Remove the support pins/Jig from the backup base.
109
SOM-2080
1005-001
6.9 Automatic Setup
Erroe ID Error Name, Description, Cause, and Remedy
49600c Support Pins/Jig detection
Support pins/Jig were detected at the NA_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
496101 Conveyor Width Automatic Set-up
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496102 Conveyor Width Automatic Set-up
It failed in zeroing operation.
Perform zeroing operation.
496103 Conveyor Width Automatic Set-up
An alarm for the interference is occurring.
-----
496104 Conveyor Width Automatic Set-up
DI was detected.
-----
496105 Conveyor Width Automatic Set-up
The conveyor cover opened.
Close the conveyor cover.
496106 Conveyor Width Automatic Set-up
Voltage reduction on the power source was detected.
Check the transfer driver.
496107 Conveyor Width Automatic Set-up
OT (+) was detected during auto operation.
Perform zeroing operation.
496108 Conveyor Width Automatic Set-up
OT (-) was detected during auto operation.
Perform zeroing operation.
496201 Conveyor Width Automatic Set-up (Input conveyor W2)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496202 Conveyor Width Automatic Set-up (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496203 Conveyor Width Automatic Set-up (Input conveyor W2)
An alarm for the interference is occurring.
-----
496204 Conveyor Width Automatic Set-up (Input conveyor W2)
DI was detected.
-----
496205 Conveyor Width Automatic Set-up (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496206 Conveyor Width Automatic Set-up (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
110
SOM-2080
6.9 Automatic Setup
1005-001
Erroe ID Error Name, Description, Cause, and Remedy
496207 Conveyor Width Automatic Set-up (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496208 Conveyor Width Automatic Set-up (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496301 Conveyor Width Automatic Setup (Positioning conveyor W1)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496302 Conveyor Width Automatic Setup (Positioning conveyor W1)
It failed in zeroing operation.
Perform zeroing operation.
496303 Conveyor Width Automatic Setup (Positioning conveyor W1)
An alarm for the interference is occurring.
-----
496304 Conveyor Width Automatic Setup (Positioning conveyor W1)
DI was detected.
-----
496305 Conveyor Width Automatic Setup (Positioning conveyor W1)
The conveyor cover opened.
Close the conveyor cover.
496306 Conveyor Width Automatic Setup (Positioning conveyor W1)
Voltage reduction on the power source was detected.
Check the transfer driver.
496307 Conveyor Width Automatic Setup (Positioning conveyor W1)
OT (+) was detected during auto operation.
Perform zeroing operation.
496308 Conveyor Width Automatic Setup (Positioning conveyor W1)
OT (-) was detected during auto operation.
Perform zeroing operation.
496401 Conveyor Width Automatic Setup (Positioning conveyor W2)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496402 Conveyor Width Automatic Setup (Positioning conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496403 Conveyor Width Automatic Setup (Positioning conveyor W2)
An alarm for the interference is occurring.
-----
496404 Conveyor Width Automatic Setup (Positioning conveyor W2)
DI was detected.
-----
496405 Conveyor Width Automatic Setup (Positioning conveyor W2)
The conveyor cover opened.
Close the conveyor cover.