SOM-2080-001_w.pdf - 第119页
1 16 SOM-2080 6.1 1 Others 1005-001 6.1 1 Others T able 13 Erroe ID Error Name, Description, Cause, and Remedy 4b0101 Head Mis-Pick-up Detection Auto Run can't be performed with the Mis-Pick-up Component on the head…
115
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
4A0205 NL Axis Warming Up
An error was found during motor (rear) startup.
-----
4A0206 NL Axis Warming Up
An error was found during motor (front) startup.
-----
4A0207 NL Axis Warming Up
An error for timeout was found at the motor (rear).
-----
4A0208 NL Axis Warming Up
An error for timeout was found at the motor (front).
-----
4A0209 NL Axis Warming Up
The operation was not performed due to limitation of the NS/DD motor (rear)
position.
-----
4A020A NL Axis Warming Up
The operation was not performed due to limitation of the NS/DD motor (front)
position.
-----
4A020B NL Axis Warming Up
The operation was not performed due to Leady Flag (rear) OFF.
-----
4A020C NL Axis Warming Up
The operation was not performed due to Leady Flag (front) OFF.
-----
4A0301 Beam Escape Operation
The motor error occurred in the beam escape operation.
-----
4A0302 Beam Escape Operation
The descent of the NL axis was detected in the beam escape operation.
Please check whether the nozzle is descending.
4A0401 Nozzle Abnormality Watch
Odd type nozzle on the head was not detected.
There is a nozzle drop. Check the head and head moving area. Als o check
PCB for missing placements. A possible cause of nozzle drop is pushing
component too hard to pickup and place. Check data.
4A0402 Nozzle Abnormality Watch
When the nozzle descended, the present location disagreement of the rotation
axis was detected.
There is a possibility that the nozzle has fallen, and confirm it in the head and the
machine, please.
6.10 Head-Related Errors
1005-001
116
SOM-2080
6.11 Others
1005-001
6.11 Others
Table 13
Erroe ID Error Name, Description, Cause, and Remedy
4b0101 Head Mis-Pick-up Detection
Auto Run can't be performed with the Mis-Pick-up Component on the head.
Please perform abandonment operation from a control menu.
4b0201 Feeder communication Error.
Communication with the feeder has error.
Please check the number of component remain.
4b0202 Feeder communication Error.
Communication with the feeder has error.(System error)
-----
4b0203 Feeder communication Error.
Feeder Alarm. Please confirm the feeder and the component.
-----
4b0204 Feeder communication Error.
Communication with feeder was not completed within predetermined time.
(Please take out and insert feeder.)
-----
4b0205 Feeder communication Error.
Failed in reading feeder data. (There is a chance of failure in feed pitch writing.)
Remove and insert feeder back in.
4b0301 Feeder Base
The feeder base detection was interrupted while the cutter was working.
[B0910,B0911]
-----
4b0302 Feeder Base
The feeder unclamp operation was not completed within predetermined time.
-----
4b0303 Feeder Base
Feeder operation errors
Please check after removing feeder in the case of using tape feeder. Please
check part of component supply in the case of using tray.
4b0304 Feeder Base
The feeder clamp operation was not completed within predetermined time.
-----
4b0305 Feeder Base
The feeder base ascent operation was not completed within predetermined time.
Check the feeder base upper limit position.
4b0306 Feeder Base
The feeder base descent operation was not completed within predetermined time.
Check the feeder base lower limit position.
117
SOM-2080
6.11 Others
1005-001
Erroe ID Error Name, Description, Cause, and Remedy
4b0307 Feeder Base
The connector (rear side) for the feeder base worked off. Do not remove the
connector during feeder base ascent.[B0916]
Connect the connector (rear) for the feeder base to the machine main body.
4b0308 Feeder Base
The connector (front side) for the feeder base worked off. Do not remove the
connector during feeder base ascent.[B0916]
Connect the connector (front) for the feeder base to the machine main body.
4b0309 Feeder Base
The check 1 of the feeder base locating in (rear) Y-direction is impossible.[B0910]
Set the feeder base to the machine.
4b030a Feeder Base
The check 2 of the feeder base locating in (rear) Y-direction is impossible.[B0911]
Set the feeder base to the machine.
4b030b Feeder Base
The check 1 of the feeder base locating in (front) Y-direction is impossible.[B0910]
Set the feeder base to the machine.
4b030c Feeder Base
The check 2 of the feeder base locating in (front) Y-direction is impossible.[B0911]
Set the feeder base to the machine.
4b0401 Recycling Conveyor
The recycle conveyer (back) was filled up. [B0924]
Please push a manual switch, and remove parts on the recycling conveyer.
4b0402 Recycling Conveyor
The recycle conveyer (front) was filled up. [B0924]
Please push a manual switch, and remove parts on the recycling conveyer.
4b0403 Recycling Conveyor
The recycling conveyer (back) motor operation time out.
There is a possibility a problem in the motor wiring. Please check the motor
wiring. Please begin the production.
4b0404 Recycling Conveyor
The recycling conveyor (front) motor operation time out.
There is a possibility a problem in the motor wiring. Please check the motor
wiring. Please begin the production.
4b0405 Recycling Conveyor
The component trash box (back) was filled up. [B0925]
Open the safety door, and clean out the wastages in it.
4b0406 Recycling Conveyor
The component trash box (front) was filled up. [B0925]
Open the safety door, and clean out the wastages in it.
4b0501 Manual Opn Error
Operation was not completed within predetermined time.
-----