SOM-2080-001_w.pdf - 第127页

124 SOM-2080 6.1 1 Others 1005-001 Erroe ID Error Name, Description, Cause, and Remedy 4b2107 SSC network abnormal There is a problem with the connection between the position board MR- MC10-U84 channel 2 and ampliﬁer. (1…

123

SOM-2080

6.11 Others

1005-001

Erroe ID Error Name, Description, Cause, and Remedy

4b2084 PCB Height Measurement

The coordinate where the height measurement was impossible was appointed.

Please appoint a coordinate in a measurable range.

4b2101 SSC network abnormal

There is abnormal in SSC network.

Please conﬁrm the cable of SSC network.

4b2102 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U82 channel 1and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2103 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U82 channel 2and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2104 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U83 channel 1and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2105 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U83 channel 2 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2106 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U84 channel 1 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

124

SOM-2080

6.11 Others

1005-001

Erroe ID Error Name, Description, Cause, and Remedy

4b2107 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U84 channel 2 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2108 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U90 channel 1 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2109 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U90 channel 2 and ampliﬁer.

(1) Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2201 Illegal Operation

There is no Pattern program ﬁle.

-----

4b2301 Feeder (Servo Error)

Alarm Code:A0 - Internal Parameter Error (Breakdown of Control PCB)

Please replace the feeder. (Do not disconnect the feeder in powering on,

otherwise it may cause the inside data broken.)

4b2302 Feeder (Servo Error)

Alarm Code:A1 - Over Current Error (Foreign substances in the tape feeding drive

section)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the

4b2303 Feeder (Servo Error)

Alarm Code:A2 - Others

-----

4b2304 Feeder (Servo Error)

Alarm Code:A3 - Others

-----

4b2305 Feeder (Servo Error)

Alarm Code:A4 - Main Circuit Power Supply Error (Please check the power supply

voltage.) (G04)

Please check the power supply voltage.

125

SOM-2080

6.11 Others

1005-001

Erroe ID Error Name, Description, Cause, and Remedy

4b2306 Feeder (Servo Error)

Alarm Code:A5 - Fault Speed Error (Tape catching)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the

4b2307 Feeder (Servo Error)

Alarm Code:A6 - Others

-----

4b2308 Feeder (Servo Error)

Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign substances)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the

4b2309 Feeder (Servo Error)

Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control PCB and

Defective servo motor)

Please replace the feeder.

4b230a Feeder (Servo Error)

Alarm Code:Ab - System Error

Please replace the feeder. (It may be caused by trouble of the control P.C.B..)

4b230b Feeder (Servo Error)

Alarm Code:Ac - Reckless Run Detection Error

Please replace the feeder. (It may be caused by trouble of the control P.C.B..)

4b230c Feeder (Servo Error)

Alarm Code:Ad - Excessive deviation in position

If the error occurs frequently, replace the feeder. (It may be caused by trouble of

the control P.C.B..)

4b2401 Feeder (Movement Error)

Alarm Code:E0 - (1)Damaged cover tape/ (2)Cover tape jammed in the storage/

(3)Splicing section peeling off

(1) Conﬁrm whether or not the cover tape is set correctly/

(2) Please remove the cover tape from the storage section./

(3) Please check the splicing condition if the work performed correctly in the

process.

4b2402 Feeder (Movement Error)

Alarm Code:E1 - Cover tape peeling off error (Get caught up)

(1) Conﬁrm whether or not the cover tape is set correctly./

(2) Conﬁrm whether or not some stickum has adhered to the suppressor./

(3) Conﬁrm the splicing condition if the work performed correctly in the process.