SOM-2080-001_w.pdf - 第140页

137 SOM-2080 6.14 Automatic T eaching 1005-001 6.14 Automatic T eaching T able 16 Erroe ID Error Name, Description, Cause, and Remedy 600101 PCB recog camera & beam offset teach. ----- 600102 PCB recog camera & b…

100%1 / 179
136
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
510e02 Auto Run Error
Displacement of fiducial mark occurred at the fiducial mark recognition (front)
during auto operation.
Perform the beam offset teaching and check if the beam X/Y has deviation.
510e03 Auto Run Error
A recognition error occurred at the fiducial mark recognition (rear) during auto
operation.
-----
510e04 Auto Run Error
A recognition error occurred at the fiducial mark recognition (front) during auto
operation.
-----
510e05 Auto Run Error
The Recog, operation of the fiducial mark (rear) was not completed within the
specified time.
-----
510e06 Auto Run Error
The Recog, operation of the fiducial mark (front) was not completed within the
specified time.
-----
510f01 Auto Run Error
It failed in the auto zeroing operation by pushing STOP PB or other stage's error.
Please start again.
510f02 Auto Run Error
It failed in the auto zeroing operation by pushing STOP PB or other stage's error.
Please start again.
510f03 Auto Run Error
It failed in the auto zeroing operation. (NL axis)
Please do the zeroing operation of stage 1 by the control menu.
510f04 Auto Run Error
It failed in the auto zeroing operation. (NL axis)
Please do the zeroing operation of stage 2 by the control menu.
510f05 Auto Run Error
It failed in the auto zeroing operation. (DD axis)
Please do the zeroing operation of stage 1 by the control menu.
510f06 Auto Run Error
It failed in the auto zeroing operation. (DD axis)
Please do the zeroing operation of stage 1 by the control menu.
510f07 Auto Run Error
Motor positioning error(HL axis)
When the fly was recognized, the positioning delay of the HL axis was detected.
Please exchange HL axes when happening frequently.
6.13 Automatic Operation Error
1005-001
137
SOM-2080
6.14 Automatic Teaching
1005-001
6.14 Automatic Teaching
Table 16
Erroe ID Error Name, Description, Cause, and Remedy
600101 PCB recog camera & beam offset teach.
-----
600102 PCB recog camera & beam offset teach.
-----
600103 PCB recog camera & beam offset teach.
-----
600104 PCB recog camera & beam offset teach.
-----
600105 PCB recog camera & beam offset teach.
-----
600106 PCB recog camera & beam offset teach.
-----
600107 PCB recog camera & beam offset teach.
-----
600108 PCB recog camera & beam offset teach.
-----
600109 PCB recog camera & beam offset teach.
-----
600201 Comp. Recog Camera offset teach.
The glass Jig can not able to be recognized.
-----
600202 Comp. Recog Camera offset teach.
It entered in a specified frequency or less and it did not enter a permissible value.
-----
600203 Comp. Recog Camera offset teach.
-----
600301 Head Rotate Theta Axis offset
-----
600302 Head Rotate Theta Axis offset
-----
138
SOM-2080
6.14 Automatic Teaching
1005-001
Erroe ID Error Name, Description, Cause, and Remedy
600303 Head Rotate Theta Axis offset
-----
600401 Head Rotate center offset teach
-----
600402 Head Rotate center offset teach
-----
600501 Reference mark position teach
-----
600502 Reference mark position teach
-----
600503 Reference mark position teach
-----
600504 Reference mark position teach
-----
600601 Nozzle position offset teach
-----
600602 Nozzle position offset teach
-----
600701 Fly recog Offset teach
-----
600702 Fly recog Offset teach
-----
600703 Fly recog Offset teach
-----
600704 Fly recog Offset teach
-----
600801 Feeder offset(A) teach
Please push the Feeder Ready SW
-----
600802 Feeder offset(A) teach
Feeder recog Mark Error
Manual Alignment