SOM-2080-001_w.pdf - 第152页
149 SOM-2080 Erroe ID Error Name, Description, Cause, and Remedy 6b2041 V.Bend Detection Operation Error Measurement Start Signal Not Recognized. (2040) Check the coupling cable between the V-bend unit PC and the main ma…
148
SOM-2080
6.16 V.Bend Detection System Error
1005-001
6.16 V.Bend Detection System Error
Table 18
Erroe ID Error Name, Description, Cause, and Remedy
6b0101 V.Bend Detection System Error
Communication time-out.
Check the coupling network cable between the V-bend unit PC and the main
machine.
6b0102 V.Bend Detection System Error
Error command.
Shut down the machine and power it up again.
6b0103 V.Bend Detection System Error
Error received data.
Shut down the machine and power it up again.
6b1001 V.Bend Detection System Error
Syetem error. (1000)
Shut down the machine and power it up again.
6b1011 V.Bend Detection System Error
Memory error in unit.(1010)
Shut down the machine and power it up again.
6b1061 V.Bend Detection System Error
Laser error.(1060)
Shut down the machine and power it up again.
6b1071 V.Bend Detection System Error
Memory error insensor section. (1070)
Shut down the machine and power it up again.
6b1081 V.Bend Detection System Error
Sensor cable not connected. (1080)
Check the connection between the V-bend unit PC and the sensor head.
6b1091 V.Bend Detection System Error
Unsteady mortor rotaion in sensor. (1090)
Check the connection of the power cable for the sensor head.
6b1101 V.Bend Detection System Error
Laser OFF. (1100)
Shut down the machine and power it up again.
6b2001 V.Bend Detection Operation Error
-----
-----
6b2011 V.Bend Detection Operation Error
Wrong level adjustment. (2010)
Shut down the machine and power it up again.
6b2031 V.Bend Detection Operation Error
Wrong component no. (2030)
Shut down the machine and power it up again.
149
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
6b2041 V.Bend Detection Operation Error
Measurement Start Signal Not Recognized. (2040)
Check the coupling cable between the V-bend unit PC and the main machine.
(Measurement Start Signal)
6b2051 V.Bend Detection Operation Error
Illegal Command Parameter. (2050)
Shut down the machine and power it up again.
6b2061 V.Bend Detection Operation Error
Unknown Reference Component Data. (2060)
Shut down the machine and power it up again.
6b2071 V.Bend Detection Operation Error
Improper Measurement Mode. (2070)
Make the measurement in the high accuracy mode.
6b3001 V.Bend Detection Error
Coplanarity Error! (3000)
Check for any bent terminals (vertically bent balls and leads).
6b3011 V.Bend Detection Error
Terminal Misregistration Error! (3010)
Check for the position and pitches of the terminals (balls and leads).
6b3021 V.Bend Detection Error
Terminal Detection Error! Wrong Measurement Data (Completely Dark Image).
(3020)
Check the component size and thickness data.
6b3031 V.Bend Detection Error
Terminal Detection Error! Error in Number of Extracted Terminals (labeling).
(3030)
Check the size and pickup position of the component.
6b3041 V.Bend Detection Error
Terminal Detection Error! Terminal Allocation Error (Impossible Terminal
Arrangement Detection). (3040)
Check the component size and thickness data.
6b3061 V.Bend Detection Error
Terminal Detection Error! Edge Detection Error (Impossible Edge Detection of
Gauge during Installation Calibration). (3060)
Check the pickup condition of the calibration gauge and the intallation of the unit.
6b3071 V.Bend Detection Error
Coplanarity Error! (3070)
-----
6b3081 V.Bend Detection Error
Impaired Terminal (Nicked) Error. (3080)
Check the position of the leads or the balls and the quantity data.
6b3091 V.Bend Detection Error
2pinTr Error! (ONE all NG)
Check the component size and thickness data.
6.16 V.Bend Detection System Error
1005-001
150
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
6b30a1 V.Bend Detection Error
2pinTr Error! (PIN1 upper)
Check for any bent terminals (vertically bent leads).
6b30b1 V.Bend Detection Error
2pinTr Error! (PIN1 lower)
Check for any bent terminals (vertically bent leads).
6b30c1 V.Bend Detection Error
2pinTr Error! (PIN2 upper)
Check for any bent terminals (vertically bent leads).
6b30d1 V.Bend Detection Error
2pinTr Error! (PIN2 lower)
Check for any bent terminals (vertically bent leads).
6b3101 V.Bend Detection Error
Reference Plane Flapping Error. (3100)
Check the pickup surface and condition of the component.
6b3111 V.Bend Detection Error
Terminal Detection Error! Out of Edge Position Measurable Range ("Near" Side).
(3110)
Check the component thickness and V-bend unit height offset data.
6b3121 V.Bend Detection Error
Terminal Detection Error! Out of Edge Position Measurable Range ("Far" Side).
(3120)
Check the component thickness and V-bend unit height offset data.
6b3131 V.Bend Detection Error
Sampling Error ("DARK" Alarm). (3130)
Decrease the dark level (dlv) of the component library data.
6b3141 V.Bend Detection Error
Sampling Error ("BRIGHT" Alarm). (3140)
Decrease the laser power (lpw) of the component library data.
6b9001 V.Bend Detection System Error
Sysyem error. (9000)
Shut down the machine and power it up again.
6b9011 V.Bend Detection System Error
-----
6.16 V.Bend Detection System Error
1005-001