SOM-2080-001_w.pdf - 第165页
162 SOM-2080 Machine Information Codes Display Field A (Scope of Machine Information) Display Field B (Details of Machine Information) 800604 Alternated Feeder Comp. Recog Error 800605 Alternated Feeder Shortage of compo…
161
SOM-2080
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800215 Auto Head Bypass Started
EEPROM error.
800216 Auto Head Bypass Started
Sensor error.
800217 Auto Head Bypass Started
Head cam position return action not complete.(Not CAM ORIGIN position)
800218 Auto Head Bypass Started
Head Driver communication time out.
800219 Auto Head Bypass Started
Nozzle change action not complete.(Not CAM ORIGIN position)
800220 Auto Head Bypass Started
Cam position self-check warning.
800301 Warning: Decreasing of Comp. Hdlg. Rate(For Noz.)
Nozzle message rate :
800302 Warning: Decreasing of Comp. Hdlg. Rate(For Noz.)
The rate of nozzle adsorption fell. A cycle stop is carried out.
800401 Warning: Decreasing of Comp. Hdlg. Rate(For Fdr)
Feeder message rate :
800402 Warning: Decreasing of Comp. Hdlg. Rate(For Fdr)
The rate of nozzle adsorption fell. A cycle stop is carried out.
800501 Alternated Tray Magazine Axis
Comp. Missing(sensor)
800502 Alternated Tray Magazine Axis
Comp. Vertical(sensor)
800503 Alternated Tray Magazine Axis
Comp. Missing(recog)
800504 Alternated Tray Magazine Axis
Comp. Recog Error
800505 Alternated Tray Magazine Axis
Shortage of component
800506 Alternated Tray Magazine Axis
Start recovery mode.
800507 Alternated Tray Magazine Axis
Comp. Thickness(sensor)
800508 Alternated Tray Magazine Axis
Comp. Pick-up Diff.(recog)
800509 Alternated Tray Magazine Axis
Comp. Reverse(recog)
800601 Alternated Feeder
Comp. missing (sensor).
800602 Alternated Feeder
Comp. Vertical(sensor)
800603 Alternated Feeder
Comp. Missing(recog)
6.19 Machine Information
1005-001
162
SOM-2080
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800604 Alternated Feeder
Comp. Recog Error
800605 Alternated Feeder
Shortage of component
800606 Alternated Feeder
Start recovery mode.
800607 Alternated Feeder
Comp. Thickness(sensor)
800608 Alternated Feeder
Comp. Pick-up Diff.(recog)
800609 Alternated Feeder
Comp. Reverse(recog)
80060a Alternated Feeder
Returned to the priority feeder
80060b Alternated Feeder
Feeder Reload Stop (Splicing)
800701 Alternated Block
Comp. Missing(sensor)
800702 Alternated Block
Comp. Vertical(sensor)
800703 Alternated Block
Comp. Missing(recog)
800704 Alternated Block
Comp. Recog Error
800705 Alternated Block
Shortage of component
800706 Alternated Block
Start recovery mode.
800707 Alternated Block
Comp. Thickness(sensor)
800708 Alternated Block
Comp. Pick-up Diff.(recog)
800709 Alternated Block
Comp. Reverse(recog)
800801 Start Auto Recovery Mode
Comp. Missing(sensor)
800802 Start Auto Recovery Mode
Comp. Vertical(sensor)
800803 Start Auto Recovery Mode
Comp. Missing(recog)
800804 Start Auto Recovery Mode
Comp. Recog Error
800805 Start Auto Recovery Mode
Shortage of component
6.19 Machine Information
1005-001
163
SOM-2080
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800806 Start Auto Recovery Mode
Comp. Thickness(sensor)
800807 Start Auto Recovery Mode
Comp. Thickness(sensor)
800808 Start Auto Recovery Mode
Comp. Pick-up Diff.(recog)
800809 Start Auto Recovery Mode
Comp. Reverse(recog)
80080b Start Auto Recovery Mode
Feeder Reload Stop (Splicing)
800901 Alarm for Shortage of Comp.
The tape end was detected. Please remove the cover tape from the storage
section.
800902 Alarm for Shortage of Comp.
Few components to feed.
800903 Alarm for Shortage of Comp.
A splicing tape was detected. (Alarm E3) Resupply the component. Please
remove the cover tape from the storage section.
800A01 Product Information
Finished product interval :
800A02 Product Information
Auto run interval :
800A03 Product Information
Nozzle usage interval :
800A04 Product Information
Product started by RUN MODE "PASS"Operation.
800A05 Product Information
Please confirm the PCB which is the one before installing Cmpnt. There is an
interference between High-speed Head and installed Cmpnt.
800A06 Product Information
Confirmation operation is executed by Multi-func Head for the interference
between Mounted Cmpnt and High-speed Head.
800B01 Machine Interface Signal
No signal from furnace.
800C01 Cancel Recovery on
-----
800D01 Maintenance Warning
Trash box fill up warning.(notice count over)
800D02 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Weekly)
800D03 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/1-Monthly)
800D04 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/3-Monthly)
6.19 Machine Information
1005-001