SOM-2080-001_w.pdf - 第5页
2 SOM-2080 1005-001 2. This instruction manual describes items not included in the instruction manual for the machine body . Please use this instruction manual together with the instruction manual for the machine body . …
1
SOM-2080
1005-001
Before Use
We are grateful to you for purchasing our special specified products.
Before operation of the machine, please read carefully the cautions and warnings, and
items in "Safety Precautions" in the beginning of the instruction manual for the machine
body and be sure you understand the instructions and cautions to perform the correct and
safety operation.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
1. The safety precautions are expressed, using the combinations of safety
alert symbols " " and headwords such as "DANGER", "WARNING", or
"CAUTION" according to the degree of danger.
Please fully understand the
meaning of each precautionary item for safety purposes.
The safety alert symbols " " are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid
any possibility of injury or death.
WARNING
This indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
A precautionary item identified as "
CAUTION" may also lead the operator
to reach a serious result. To avert a serious result, please respect the described
cautions.
NOTICE
This indicates a potentially hazardous situation which, if not
avoided, may result in property damages.
DANGER
This indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal word is
limited to the most extreme situations.
2
SOM-2080
1005-001
2. This instruction manual describes items not included in the instruction manual for the
machine body. Please use this instruction manual together with the instruction manual
for the machine body.
•
Identifying Alert Icons
: This symbol mark represents danger or prompts warning.
: This symbol mark represents prohibited operations.
: This symbol mark represents forced operations or instructions.
•
Identifying Icons in Manual
Notice
This icon shows an important precautionary or a regulatory item.
Note
This icon shows the descriptions for correct operations of the machine.
Reference
This icon shows the items to be referred to.
Procedure
This icon shows the operation procedures.
Contents
3
Page
SOM-2080
1005-001
Before Use ............................................................................................. 1
Contents .............................................................................................. 3
1. Scope ............................................................................................. 4
2. Function ......................................................................................... 4
3. Error Message Language Change-Over ........................................ 4
4. Description of Error ID (Example) .................................................. 5
5. Error IDs and Controlled Areas ...................................................... 6
6. Error IDs and Remedial Procedures .............................................. 7
6.1 Safety Devices ........................................................................ 7
6.2 Data ........................................................................................ 15
6.3 Conveyor ................................................................................ 17
6.4 Tray Feeder ............................................................................ 36
6.5 Tray Feeder 2 ......................................................................... 68
6.6 Recognition Communication ................................................... 98
6.7 PEC Recognition .................................................................... 99
6.8 Component Recognition ......................................................... 101
6.9 Automatic Setup ..................................................................... 103
6.10 Head-Related Errors ............................................................... 114
6.11 Others ..................................................................................... 116
6.12 Pickup Error ............................................................................ 131
6.13 Automatic Operation Error ...................................................... 133
6.14 Automatic Teaching ................................................................ 137
6.15 Test ......................................................................................... 146
6.16 V.Bend Detection System Error .............................................. 148
6.17 Barcode Detection .................................................................. 151
6.18 ACV ........................................................................................ 153
6.19 Machine Information ............................................................... 160
6.20 System Error ........................................................................... 175