X-Series-Maintenance-Manual(1) - 第106页
Major Maintenance Maintenance Tasks for C&P6 /12 Head Preparatory Steps 106 Maintenance Manual SIPLACE X Series Preparator y Steps 5.7.2 Preparatory Steps Assembling the head mount ► Assemble the head mount. Read the…
Major Maintenance
Consumables, Spare and Wear Parts, Tools Maintenance Tasks for C&P6/12 Head
Maintenance Manual SIPLACE X Series 105
Recommended spare parts
▪ Star brake assembly DLM/RVC [03001653Sxx]
▪ PAS-LX-12 distributor plate, complete [00368211Sxx]
▪ Set of sleeves for 12 seg. head [00116113Sxx]
▪ Set of sleeves for 12 seg. head [00116114Sxx]
▪ Individual sleeves for 6 seg. head [00350588Sxx]
▪ Individual sleeves for 6 seg. head [00352957Sxx]
▪ Vacuum generator assembly [03003236Sxx]
▪ Distributor piece [00319827Sxx]
▪ Nozzle magazine 7/9xx
Tools
▪ ESD wriststrap TYP.OK/WRS [00320279-xx]
▪ Universal head stand [00363290-xx]
▪ Antistatic tweezers, type Bernstein 5
-
192 [00377393
-
xx]
▪ Antistatic tweezers, type Bernstein 5
-
195 [00377394
-
xx]
▪ TorqueVario-S screwdriver (100-500 cNm) (100-500 cNm) [03078400-xx]
▪ Bit holder for TorqueVario screwdriver [03078706-xx]
▪ Extension/straight TX20 [03073256-xx]
▪ Hexagon socket head cap screw driver 0.7-2 [00320265-xx]
▪ Torx Allen screwdriver TX8 [03080081-xx]
▪ Calibration tool version SST23 [03034148-xx]
▪ Set of Allen wrenchesl [00376492-xx]
▪ Set of Phillips screwdrivers [00319064-xx]
▪ Brush [00378523-xx]
▪ Angled tweezers [00096487-xx]
▪ SPIRAL drill cylinder R.1,4 D DIN 338 [00092026-xx]
▪ SPIRAL drill cylinder R.1,1 D DIN 338 [00092020-xx]
▪ Oil dispenser Z axis with STRUCTVIS GHD 7 ml [00367071-xx]
▪ Plunger maintenance tool [03049689Sxx]
▪ Cleaning tools for encoder disk [03049704-xx]
▪ Sleeve cleaning device [00377260-xx]
▪ Pliers for fitting plastic hose 2MS-PK-3/4 [00346929-xx]
▪ MM greasing of valve plunger with tool [00195066-xx]
▪ Cleaning box 9xx [03003183Sxx]
▪ Guiding plate short [03029178-xx]
▪ Plastic brush Dm 8 [00325866-xx]
▪ Calibration tool version 3 [03010565-xx]
Major Maintenance
Maintenance Tasks for C&P6/12 Head Preparatory Steps
106 Maintenance Manual SIPLACE X Series
Preparatory Steps
5.7.2 Preparatory Steps
Assembling the head mount
► Assemble the head mount.
Read the head mount manual (German and English: [00196371-xx]).
► Connect the assembly mount ESD connection to an ESD connection at the workplace.
Dismantle the placement head
► Set the nozzles down in the nozzle changer.
► Switch the placement machine off at the main switch.
► Dismantle the head cover.
► Dismantle the placement head and remove it from the placement machine. For removal and
installation details, read the service manual for the respective machine.
CAUTION
ESD regulations!
► Always observe the ESD regulations described in the user manual.
NOTICE! The component sensor is optional.
If a component sensor (1) is available, loosen the two
fastening screws and remove the head.
The DLM4 head does not support the BE-Sensor and is
missing accordingly.
► Cover the feeder area to protect the feeder modules
and front part of the head.
► (1) Open the strain relief.
Major Maintenance
Performing Maintenance Tasks Maintenance Tasks for C&P6/12 Head
Maintenance Manual SIPLACE X Series 107
Performing Maintenance Tasks
5.7.3 Performing Maintenance Tasks
Cleaning the Tur ning Stati on Read Unit
5.7.3.1 Cleaning the Turning Station Read Unit
Ribbon cable (Example of X series)
► Open the clamp (2) above the two flat ribbon cables
(1) and remove the flat ribbon cables.
► (1) Loosen the 4 screws (Inbus 3 mm) fastening the
front section of the head and remove it.
CAUTION! Hold the front part of head firmly as
you remove the screws.
► Turn the star half a revolution to avoid damaging the
valve plunger drive with the valve plunger.
► Fit the placement head onto the head mount.
► Remove the sleeves and place them in the vessels
provided.
► Remove one sleeve.
► Clean the read unit lens with a cottonwool bud
moistened with ethanol.
► Fit the sleeve back into place.