X-Series-Maintenance-Manual(1) - 第16页
Introduction Abbreviations Calculation of Maintenance Intervals 16 Maintenance Manual SIPLACE X Series
Introduction
Calculation of Maintenance Intervals Release History
Maintenance Manual SIPLACE X Series 15
Release History
1.4 Release History
Abbreviations
1.5 Abbreviations
Release Changes
06/2010 Revision
02/2011 Revision
Abbreviations Description
PA Placement area
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
C&P12, CP12 Collect&Place head with 12 segments
C&P20, CP20 Collect&Place head with 20 segments
C&P6, CP6 Collect&Place head with 6 segments
CPP Collect&Pick&Place head
CPx Collective term for CPP, CP20, CP12 and/or CP6
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
PCB Board
P&P, PP Pick&Place
SC Station computer
TH Twin head
VS Vision system
Introduction
Abbreviations Calculation of Maintenance Intervals
16 Maintenance Manual SIPLACE X Series
Overview of the Modules
Overview of X Series Machines
Maintenance Manual SIPLACE X Series 17
Overview of the Modules
2 Overview of the Modules
Overview of X Series Machines
2.1 Overview of X Series Machines
SIPLACE X4
1. Machine frame
2. PCB conveyor (flexible dual conveyor)
3. Extension kit on the PCB input side
4. Component trolley docking unit, tape cutter, used
tape channel (4x)
5. Gantry 1 with placement head
6. Gantry 2 with placement head
7. Extension kit on the PCB output side
8. Gantry 3 with placement head
9. Monitor (2x)
10. Keyboard (2x)
11. Gantry 4 with placement head
SIPLACE X4I
1. Machine frame
2. PCB conveyor (flexible dual conveyor)
3. Extension kit on the PCB input side
4. Component trolley docking unit, tape cutter, used
tape channel (4x)
5. Gantry 1 with placement head
6. Gantry 2 with placement head
7. Extension kit on the PCB output side
8. Gantry 3 with placement head
9. Monitor (2x)
10. Keyboard (2x)
11. Gantry 4 with placement head