X-Series-Maintenance-Manual(1) - 第18页
Overview of the Modules Overview of CPP Head 18 Maintenance Manual SIPLACE X Series Overview of CPP Head 2.2 Overview of CPP Head Overview of C&P 20A Head 2.3 Overview of C&P20A Head Overview of C &P6/12 Head…
Overview of the Modules
Overview of X Series Machines
Maintenance Manual SIPLACE X Series 17
Overview of the Modules
2 Overview of the Modules
Overview of X Series Machines
2.1 Overview of X Series Machines
SIPLACE X4
1. Machine frame
2. PCB conveyor (flexible dual conveyor)
3. Extension kit on the PCB input side
4. Component trolley docking unit, tape cutter, used
tape channel (4x)
5. Gantry 1 with placement head
6. Gantry 2 with placement head
7. Extension kit on the PCB output side
8. Gantry 3 with placement head
9. Monitor (2x)
10. Keyboard (2x)
11. Gantry 4 with placement head
SIPLACE X4I
1. Machine frame
2. PCB conveyor (flexible dual conveyor)
3. Extension kit on the PCB input side
4. Component trolley docking unit, tape cutter, used
tape channel (4x)
5. Gantry 1 with placement head
6. Gantry 2 with placement head
7. Extension kit on the PCB output side
8. Gantry 3 with placement head
9. Monitor (2x)
10. Keyboard (2x)
11. Gantry 4 with placement head
Overview of the Modules
Overview of CPP Head
18 Maintenance Manual SIPLACE X Series
Overview of CPP Head
2.2 Overview of CPP Head
Overview of C&P 20A Head
2.3 Overview of C&P20A Head
Overview of C &P6/12 Head
2.4 Overview of C&P6/12 Head
1. Star bearing
2. Segment
3. Front plate
4. Silencer
5. Linear guide for Z drive
6. Component sensor (on the underside of the head)
1. Compressed air connection for 20 Venturi nozzles in
the hold circuit
2. Star motor
3. Pressure control valve for pickup and place circuit
4. Component sensor
5. DP drives (20 x)
6. Star with 20 nozzles
7. Component Camera
8. Board for "holding circuit vacuum sensor"
9. Intermediate distributor board
1. Intermediate distributor, digital (under the cover)
2. Star motor
3. Z axis motor
4. Stepping motor
5. Component camera
Overview of the Modules
Overview of TwinHead
Maintenance Manual SIPLACE X Series 19
Overview of TwinHead
2.5 Overview of TwinHead
1. Module 1
2. Module 2, rotated by 180° compared to module 1.
3. Main board on module 1 and module 2
4. D Axis
5. Linear motor Z axis
6. Z axis incremental measurement system