X-Series-Maintenance-Manual(1) - 第6页

Content 6 Maintenance Manual SIPLACE X Series

100%1 / 118
Content
Maintenance Manual SIPLACE X Series 5
5.4 Maintenance Work on the Gantry 71
5.4.1 Consumables, Spare and Wear Parts, Tools 71
5.4.2 Preparatory Steps 71
5.4.2.1 Filling the Grease Gun 72
5.4.3 Performing Maintenance Tasks 73
5.4.3.1 Greasing and Cleaning the X Axis 73
5.4.3.2 Greasing and Cleaning the Y Axis 75
5.4.3.3 Cleaning the Linear Guides of the X Axis 75
5.4.3.4 Cleaning the Linear Guides of the Y Axis 76
5.4.3.5 Checking the Cooling Air Hoses for the Y Axis 76
5.5 Maintenance Tasks for C&P20A Head 78
5.5.1 Difference Between C&P20 and C&P20A 78
5.5.2 Consumables, Spare and Wear Parts, Tools 79
5.5.3 Preparatory Steps 80
5.5.3.1 Overview of Multipette 81
5.5.3.2 Assembling the Multipette 81
5.5.3.3 Filling and Setting the Multipette 82
5.5.3.4 Releasing the Combitip from the Multipette 82
5.5.4 Overview of Lubrication Points 83
5.5.5 Performing Maintenance Tasks 84
5.5.5.1 Oiling the DP Driver Bearing 84
5.5.5.2 Oiling the DP Segment Guide 85
5.5.5.3 Oiling the Z Axis Linear Guidance 86
5.5.5.4 Checking/Replacing the Filter Disks 87
5.5.5.5 Checking/Replacing the Switching Disk 89
5.5.5.6 Checking/Replacing the Vacuum-Conducting Parts 90
5.5.5.7 Cleaning the Component Sensor 91
5.5.6 Final Work 92
5.6 Maintenance Tasks for CPP Head 93
5.6.1 Consumables, Spare and Wear Parts, Tools 93
5.6.2 Preparatory Steps 93
5.6.2.1 Overview of Multipette 95
5.6.2.2 Assembling the Multipette 95
5.6.2.3 Filling and Setting the Multipette 96
5.6.2.4 Releasing the Combitip from the Multipette 96
5.6.3 Overview of Lubrication Points 97
5.6.4 Performing Maintenance Tasks 98
5.6.4.1 Oiling the Z Axis Linear Guidance 98
5.6.4.2 Oiling the Support Roller 99
5.6.4.3 Oiling the DP Driver Bearing 99
5.6.4.4 Oiling the DP Segment Guide 100
5.6.4.5 Oiling the Star Bearing 100
5.6.4.6 Checking/Replacing the Vacuum-Conducting Parts 101
5.6.4.7 Cleaning the Component Sensor 102
5.6.5 Final Work 103
5.7 Maintenance Tasks for C&P6/12 Head 104
5.7.1 Consumables, Spare and Wear Parts, Tools 104
5.7.2 Preparatory Steps 106
5.7.3 Performing Maintenance Tasks 107
5.7.3.1 Cleaning the Turning Station Read Unit 107
5.7.3.2 Z Axis 108
5.7.3.3 Star 109
5.7.3.4 Distributor (back part of head) 110
5.7.3.5 Star brake 111
5.7.3.6 Valve adjustment drives 112
5.7.3.7 Turning station 112
5.7.3.8 Vacuum Generator 113
5.7.3.9 Component sensor (only DLM3) 115
5.7.4 Final Work 116
Content
6 Maintenance Manual SIPLACE X Series
Introduction
Conventions for the Use of Safety Instructions Safety Instructions
Maintenance Manual SIPLACE X Series 7
Introduc tion
1Introduction
This manual describes maintenance tasks for the SIPLACE® X series machines.
Safety Instruc tions
1.1 Safety Instructions
Conventions for the Use o f Safety Instr uctions
1.1.1 Conventions for the Use of Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as follows
according to the level of risk:
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the user manual of the relevant machine for all
work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.