X-Series-Maintenance-Manual(1) - 第65页
Major Maintenance Maintenance Intervals for Major Maintenance Maintenance Manual SIPLACE X Series 65 DLM C&P6/12 head Maintenance task Duration [min] CP6/12 Each week Every 3 months Every 6 months Every 12 months Cle…
Major Maintenance
Maintenance Intervals for Major Maintenance
64 Maintenance Manual SIPLACE X Series
Multistar CPP head (6 monthly or after 40 mill. CO)
Speedstar C&P20(A) head (3 monthly or after 30 or 37.5 mill. CO
Maintenance task Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Dismantle the placement head 5 X*
Lubricate the head
▪ Oil the Z axis linear guide
▪ Oil the Z axis support roller
▪ Oil the DP driver bearing
▪ Oil the DP segment guide
▪ Oil the star bearing
27 X*
Check/replace the vacuum-conducting parts
▪ Check/replace the filter disks
▪ Check/replace the DP vacuum hoses
▪ Check/replace the silencer
▪ Check/replace the hold circuit
17 X*
Clean the component sensor 1 X*
Fit the placement head 15 X*
Maintenance task Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Dismantle the placement head 5 X*
Lubricate the C&P20/C&P20A head
▪ Oil the DP driver bearing
▪ Oil the DP segment guide
▪ Oil the Z axis linear guide
14 X*
Check/replace the filter disks 15 X*
Check/replace the switching disk 2 X*
Check/replace the vacuum-conducting parts
▪ Check/replace the silencer
▪ Check/replace the hold circuit
6 X*
Clean the component sensor 1 X*
Fit the placement head 15 X*
Major Maintenance
Maintenance Intervals for Major Maintenance
Maintenance Manual SIPLACE X Series 65
DLM C&P6/12 head
Maintenance task Duration
[min]
CP6/12
Each
week
Every 3
months
Every 6
months
Every 12
months
Clean the read unit for the turning station 2/2 X
Z axis:
▪ Clean and grease the toothed belt
▪ Clean the toothed belt
▪ Clean the rollers and toothed wheels
▪ Check the toothed belt for wear
▪ Grease the toothed belt
▪ Check the Z axis guide
▪ Check the jaws
▪ Grease the Z axis guide
6/6 X
Star:
▪ Clean the star and the vacuum distributor
disk
▪ Grease the running surface of the star
brake
▪ Clean the segments
▪ Remove dirt from around the segments
3/4 X
Distributor:
▪ Clean and grease the O-rings
▪ Check for damage
▪ Clean the distributor
▪ Blow air through the distributor
▪ Check the ball catches
▪ Clean the seat
3/3 X
Star brake:
▪ Check for damage and function
▪ Wipe/remove grease
▪ Fill the holes with grease
▪ Grease the surface
2/2 X
Valve adjustment drives:
▪ Clean the valve adjustment drives
▪ Clean the disk and the space between
▪ Clean the ball bearings
▪ Check that the ball bearings are working
correctly
▪ Remove visible dirt
2/2 X
Turning station:
▪ Clean the black O-rings
▪ Check the O-ring for damage
▪ Check the toothed belt for damage
▪ Clean the stop faces
▪ Clean the friction wheel
4/4 X
Major Maintenance
Maintenance Intervals for Major Maintenance
66 Maintenance Manual SIPLACE X Series
* see also maintenance display
See also
1.3.2 Calculation of Maintenance Intervals [ ➙ 14]
Vacuum generator:
▪ Installation/removal
▪ Clean the Venturi nozzles
▪ Blow air through Venturi nozzles
▪ Clean and grease the O-rings
▪ Clean and blow through the vacuum
generator block.
▪ Silencer: remove
▪ Silencer: clean holes to the Venturi
nozzles
▪ Silencer: check for dirt
▪ Silencer: check the plastic fixtures
6/6 X
Component sensor
▪ Clean the component sensor
1/1 X
Installation and removal of the head front
section
6/6 X
Calibrate and measure 20/25 X
Maintenance task Duration
[min]
CP6/12
Each
week
Every 3
months
Every 6
months
Every 12
months