4OM-1054-002 - 第54页
(22) T ape Feed Unit Section 1.3 Maintenance Spots 021 1-004 1-40 AGS01ETRP Fig. 4A46
A
B
A
B
Cam Follower 3M20
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 14 (olive) nozzle.
Linear Guide (Horizontal Plane) 3M21
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
A. Oil Inlets
Inject grease into the oil inlet with a grease
gun.
* Use the U- and P-type attachments.
B. Ball Surfaces
Wipe off old grease with a rag and apply
new one to the ball surfaces with a dispense
gun.
* Use No. 19 (brown) nozzle.
Grease should be applied every 3 months after
the initial month.
Linear Guide (Vertical Plane) 3M22
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
A. Oil Inlets
Inject grease into the oil inlet with a grease
gun.
* Use the U- and P-type attachments.
B. Ball Surfaces
Wipe off old grease with a rag and apply
new one to the ball surfaces with a dispense
gun.
* Use No. 19 (brown) nozzle.
Grease should be applied every 3 months after
the initial month.
U Type
P Type
U Type
P Type
Fig. 4A45
Placement Up/Down Section
1.3 Maintenance Spots
0211-004 1-39 AGS01ETRP
(22) Tape Feed Unit Section
1.3 Maintenance Spots
0211-004 1-40 AGS01ETRP
Fig. 4A46
(23) Nozzle Guide Section
1.3 Maintenance Spots
0211-004 1-41 AGS01ETRP
Fig. 4A47