00192231-09_VD_SSW 407.05_de en - 第11页

Software Version Description, Station Software Version 407.05 07/2008 Edition As to computer hardware, the follo wing configurations are required: Station computer under Windows NT 4.0 Station computer SCENIC Pro C5 233 …

100%1 / 208
Software Version Description, Station Software Version 407.05 07/2008 Edition
4 Requirements
The following operating system must be installed on the station computer to ensure that the station software
can be installed and will function correctly:
Windows NT 4.0 with Service Pack 6 and Microsoft Security Patch for Windows NT 4.0 (see
9.1.1) or
Windows XP with ServicePack 2
Attention:
Please make sure that only the Siemens XP Professional Service Pack 2 is installed. The
modified Siemens XP Professional Service Pack 2 is based on Mircrosoft Windows XP Service
Pack 2. Please make sure that never the Mircrosoft XP Professional Service Pack 2 is
installed.
No software or hardware products may be installed on the computer which are not compatible
with Windows XP SP2 (for details, refer to the relevant information from the vendor and to the
Microsoft website
http://support.microsoft.com/default.aspx?kbid=884130).
For details on the SIPLACE products, contact your SIPLACE representative.
If you encounter problems during installation or if the software does not operate correctly, please check
whether Service Pack 5 is installed. The installed Service Pack is indicated during the operating system boot
sequence.
For the troublefree functioning of the station software, it is prerequisite that the other machine components
be equipped with the following versions:
Station Computer
Version
SITEST
Version
Machine Controller
Version
Line Computer
Version
SIPLACE Pro
Version
407.05 407.05 407.05
≥ 502.01 ≥1.1
(Standard)
≥ 503.01
for high components
and traceability
3.2 (Default)
as of 5.0*)
as of 5.2**)
*) when using forced setup verification
**) when using Splice sensors
The functional statuses of the station computer and machine controller software must be
compatible!
10 of 104
Software Version Description, Station Software Version 407.05 07/2008 Edition
As to computer hardware, the following configurations are required:
Station computer under Windows NT 4.0
Station computer SCENIC Pro C5 233 MHz Item 00328348-04 or
Station computer SCENIC Pro C6c 300 MHz Item 00328348-05 or
Station computer SCENIC 621 400 MHz Item 00349688-03 or
Station computer SCENIC 621 533 MHz Item 00356148-02 or
Station computer SCENIC 661 700 MHz Item 00356147-02
with at least 64 Mbyte RAM
Station computer under Windows XP
Station computer SCENIC N300 2.0 GHz Item 00373605-02 or
Station computer SCENIC N320 2.8 GHz Item 00375537-01 or
Station computer SCENIC N320 2.8 GHz Item 00376210-02
with at least 256 Mbyte RAM
11 of 104
Software Version Description, Station Software Version 407.05 07/2008 Edition
Requirements for machine types SIPLACE S20 and SIPLACE F
4
:
• Configuration level of M44 9
• MVS 200 EPROM = 2272E, GAL and Quarz XC75-6/A
• SW version of axes 1.81
• Coplanarity module COV 201.012f / 3.0ff, FW version = 308
• SW version C5 head EPROM 2.7 (item no. 00334205-07)
• SW version sub-modular head card 6.09
• SW version component table 5.02
Requirements for machine type SIPLACE F
5
:
• Configuration level of M44 9
• MVS 340 VME item no. 00335673-03, SW version = 2321M
• SW version of axes 1.81
• Coplanarity module COV 201.012f / 3.0ff, FW version = 308
• SW version C5 head EPROM 2.7 (item no. 00334205-07)
• SW version sub-modular head card 6.09
• SW version component table 5.02
Requirements for machine type SIPLACE S23:
• Configuration level of M54 2
• MVS 340 VME item no. 00335673-03, SW version = 2321M
• SW version of axes 4.03
• Servo configuration level 2 for X-axis, Y-axis and star axis
• Servo TDS120/A2.5Z für Z-axis
• SW version C5 head EPROM 2.7 (item no. 00334205-07) or
• SW version modular head card 6.09
• SW version component table 5.02
Requirements for machine type SIPLACE F5HM:
• Configuration level of M54 2
• MVS 340 VME item no. 00335673-03, SW version = 2321M
• SW version of axes 4.03
• Coplanarity module COV 201.012f / 3.0ff, FW version = 308
• Servo configuration level 2 for X-axis, Y-axis and star axis
• SW version modular head card 6.09
• SW version component table 5.02
12 of 104