00192231-09_VD_SSW 407.05_de en - 第12页
Software Version Description, Station Software Version 407.05 07/2008 Edition Requirements for machine types SIPLACE S20 and SIPLACE F 4 : • Configuration level of M44 9 • MVS 200 EPROM = 2272E, GAL and Quarz XC75-6/A • …
Software Version Description, Station Software Version 407.05 07/2008 Edition
As to computer hardware, the following configurations are required:
Station computer under Windows NT 4.0
Station computer SCENIC Pro C5 233 MHz Item 00328348-04 or
Station computer SCENIC Pro C6c 300 MHz Item 00328348-05 or
Station computer SCENIC 621 400 MHz Item 00349688-03 or
Station computer SCENIC 621 533 MHz Item 00356148-02 or
Station computer SCENIC 661 700 MHz Item 00356147-02
with at least 64 Mbyte RAM
Station computer under Windows XP
Station computer SCENIC N300 2.0 GHz Item 00373605-02 or
Station computer SCENIC N320 2.8 GHz Item 00375537-01 or
Station computer SCENIC N320 2.8 GHz Item 00376210-02
with at least 256 Mbyte RAM
11 of 104
Software Version Description, Station Software Version 407.05 07/2008 Edition
Requirements for machine types SIPLACE S20 and SIPLACE F
4
:
• Configuration level of M44 9
• MVS 200 EPROM = 2272E, GAL and Quarz XC75-6/A
• SW version of axes 1.81
• Coplanarity module COV 201.012f / 3.0ff, FW version = 308
• SW version C5 head EPROM 2.7 (item no. 00334205-07)
• SW version sub-modular head card 6.09
• SW version component table 5.02
Requirements for machine type SIPLACE F
5
:
• Configuration level of M44 9
• MVS 340 VME item no. 00335673-03, SW version = 2321M
• SW version of axes 1.81
• Coplanarity module COV 201.012f / 3.0ff, FW version = 308
• SW version C5 head EPROM 2.7 (item no. 00334205-07)
• SW version sub-modular head card 6.09
• SW version component table 5.02
Requirements for machine type SIPLACE S23:
• Configuration level of M54 2
• MVS 340 VME item no. 00335673-03, SW version = 2321M
• SW version of axes 4.03
• Servo configuration level 2 for X-axis, Y-axis and star axis
• Servo TDS120/A2.5Z für Z-axis
• SW version C5 head EPROM 2.7 (item no. 00334205-07) or
• SW version modular head card 6.09
• SW version component table 5.02
Requirements for machine type SIPLACE F5HM:
• Configuration level of M54 2
• MVS 340 VME item no. 00335673-03, SW version = 2321M
• SW version of axes 4.03
• Coplanarity module COV 201.012f / 3.0ff, FW version = 308
• Servo configuration level 2 for X-axis, Y-axis and star axis
• SW version modular head card 6.09
• SW version component table 5.02
12 of 104
Software Version Description, Station Software Version 407.05 07/2008 Edition
CAUTION !
Following the exchange of GAL and Quartz on the
MVS, the entire machine has to be measured!
For the calibration of the machine, the calibration tool
pocket with integrated machine zero point has to be
installed!
The V24 link from the machine controller to the station
computer needs to be disconnected on both sides if
the predecessor software version used at the machine
is of an earlier release than 404.01.
On no account should the machine be switched off
during the download of the ICOS software to the MVS.
13 of 104