00192231-09_VD_SSW 407.05_de en - 第76页

Software Version Description, Station Software Version 407.05 07/2008 Edition Setup Page Parameter Value 7 Not assigned transparent 10 SMP_INT5 transparent 11 SMP_INT6 transparent 14 Onboard IDE transparent PCI Setup Mul…

100%1 / 208
Software Version Description, Station Software Version 407.05 07/2008 Edition
Setup settings
Setup Page Parameter Value
System Security Enter Setup -
System Boot -
Floppy Disk Read Only disabled
Hard Disk Read Only disabled
Date and Time Date
current date
Time
current time
AT Hard Disk Hard Disk Type A
see illustration
Hard Disk Type B -
Hard Disk Type C -
Hard Disk Type D -
Block Mode
disabled
32-Bit Mode
disabled
Fast PIO
disabled
Floppy Disk Drive A: 1,44 MByte
Drive B: none
Test Floppy Disks enabled
Boot Features Boot Sequence A:, C:
Quick Memory Test disabled
Halt on Errors disabled
Keyboard Errors disabled
Disk Errors disabled
Num Lock On enabled
Standard Chipset System Cache primary and secondary
System ROM Cache
Video ROM Shadow, Cache
Other disabled
Advanced Chipset DRAM Timing 60 ns
16-Bit I/O Recovery 1 Clock
8-Bit I/O Recovery 1 Clock
Parity Check disabled
Memory Hole
enabled
Peripherals Serial Port A 3F8h, IRQ4
Serial Port B 2F8h, IRQ3
Parallel Port 378h, IRQ7, bidirectional
Primary DIE enabled
Secondary DIE disabled
Floppy Disks enabled, normal
PS/2 Mouse enabled
IMC Interrupts PC-IRQ
IRQ-Source IRQ-Mode
3 Onboard COM transparent
4 Onboard COM transparent
5
MISC_INT
transparent
6 Onboard Floppy transparent
75 of 104
Software Version Description, Station Software Version 407.05 07/2008 Edition
Setup Page Parameter Value
7 Not assigned transparent
10 SMP_INT5 transparent
11 SMP_INT6 transparent
14 Onboard IDE transparent
PCI Setup MultiMedia Enable disabled
INT A
7
INT B none
INT C none
INT D none
COM Redirection Status enabled (ANSI/VT100)
Baudrate 19200 Bd
Mode Autoredirection
IMC Miscellaneous Disable CTRL-C/CTRL-BREAK disabled
Force Cold boot on CTRL-ALT-DEL disabled
Disable BIOS E-Segment at boot
enabled
9.2.2.2 Installation
The installation of the machine controller operating system for the SIPLACE S23 / F5HM is identical to that
for other machine types. Copies of the diskettes are contained on the station software CD in the directory
Siplace\Sip_mc\80s23\FD_image.RM3. The diskettes can be created on any PC running under Windows-
NT, e.g. the station computer. To this end, start the programs rmos-1.exe, or rmos-2.exe and follow the
directions. Be sure to use the correct set of diskettes (for SIPLACE S23 / F5HM) as otherwise the operating
system will not run up properly although the installation was performed successfully.
76 of 104
Software Version Description, Station Software Version 407.05 07/2008 Edition
9.3 Installation of the SIPLACE Software
9.3.1 Interfaces
To be able to install the optional GEM application software on the GEM computer, the Windows for GEM
software version V407.02 must be installed.
9.3.2 Installation Instructions/Upgrade Instructions
9.3.2.1 Definitions
9.3.2.1.1 Initial Installation
The first-time installation of the Station Software on the SIPLACE machines S-20 and F
4
is referred to as
"initial installation".
9.3.2.1.2 Update
If an initial installation was previously performed and a new revision level of the Station Software is to be
loaded, this procedure is referred to as an "Update". The revision level is identified by the last two numerals
of the complete version number.
9.3.2.1.3 Upgrade
The functionality of the station software is identified by the three-digit code integrated in the complete version
number.
Example:
407.xx = The number 407 indicates the functionality of the software
The installation of a SW version with a higher version number than the already-installed SW version is
referred to as an "Upgrade".
9.3.2.2 Installation of the Station Computer and the Machine Controller
The installation time depends on the machine type to be installed. It takes 30 minutes on average for the
SIPLACE S20, SIPLACE F
4
, SIPLACE F
5
and about 15 minutes for the SIPLACE S23 and SIPLACE F5HM
systems.
There are only two differences between installing station software for Windows XP and the familiar
installation under Windows NT. Explicit reference is made to these differences at the relevant points.
77 of 104