00198765-02_VD_SSW_713.1_R20-1_EN_DE - 第23页
Station Software 713.1 (R 20-1) / V ersion Description 05/2020 Edition 23 5.7 Placement Impr ovements – Free ly Programma ble Custom Reject Bins Compatible mode: Complete Additional to the alrea dy existing stan dard SIP…
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
22
5.5 New Nozzle Types
New Nozzles for Measuring Feeder
The following measuring nozzle types have been introduced:
– 1403, item no. [03206822-xx]
– 1404, item no. [03206823-xx]
– 1406, item no. [03206824-xx]
– 2403, item no. [03206825-xx]
– 2404, item no. [03206826-xx]
– 2406, item no. [03206827-xx]
– 4403, item no. [03206829-xx]
– 4404, item no. [03206828-xx]
– 4406, item no. [03206830-xx]
The nozzles are designed for electrical verification of components in the measuring feeder. They
are not assigned to any component shape of the standard shape library.
Changed Length for Calibration Nozzle 2204
Calibration nozzle 2204 for CPP with new length (14.8 mm instead of 15.0 mm)
5.6 Conveyor Direction in Station GUI
Compatible mode: Complete
The conveyor direction in the station GUI has been altered to now match the machine side from
where the station GUI is accessed from. For example, if the station GUI is accessed from the right
side (conveyor direction from left to right), the layout of the views in the station GUI also reflects a
conveyor direction from left to right.
NOTICE
To use this feature, you need to log off and on from the station.
If the wrong display outputs were connected, the orientation can be corrected with the Switch
displays button under Tool settings - GUI settings.
Restrictions
– The machine can only be operated from one machine side at a time. Working parallel from two
different sides at once is not possible.
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
23
5.7 Placement Improvements – Freely Programmable Custom Reject
Bins
Compatible mode: Complete
Additional to the already existing standard SIPLACE reject bins, it is possible to program custom
reject bins. These custom reject bins can be used to e.g. dispose of “dipped” or “glued”
components separately from other disposed components. For further information, please refer to
the Feature Guide Freely Programmable Reject Bin, item no. [00198771-xx].
The custom reject bins can be configured via an individual XML file. It is also possible to disable
standard reject bins using this XML file.
WARNING
Risk of crashing
If the custom reject bin is not installed correctly and the highest edge of the customer
reject bin exceeds the z-height of the conveyor edge, a crash might occur.
► Make sure the custom reject bin is correctly installed!
It is not possible to use a safety circuit to check whether the custom reject bin is fit
correctly into the machine.
5.8 Placement Improvements – Automatic Pin1 Recognition
Compatible mode: Complete
To save time during placement, it is possible to limit the check period and check frequency per
component for the orientation check during position check.
For this, the Check pickup orientation on component change option in the Object Properties of
the Component Editor in SIPLACE Pro has been extended. If this option is activated, the check
mode can be set to either Manually by user or to Automatic. If the Automatic mode is selected,
three further options can be specified: the number of measurements, the checking period, and the
check sequence.
For further information, please refer to the Feature Guide Automatic Pin1 Recognition, item no.
[00198770-xx].
5.9 Reject Rate View - Enhancements
Compatible mode: Complete
The reject rate view per location has been extended by an additional widget which displays the
number and kind of errors on a daily or hourly basis. The reject rate view can be accessed via
Messages - Statistics.
5.10 Changes for Stop Thresholds for Reject Rate Monitoring
Compatible mode: Complete
The “track empty” errors are no longer resettable on the station GUI. Instead, an error message is
displayed which can only be cleared by Machine Service, i.e. the pickup settings checked option
on the error to clear the message is deactivated for Operator and Advanced production.
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
24
5.11 Changes With HERMES-IPC-9852 Version 1.2
Compatible mode: Complete
The station software fully complies with HERMES-IPC-9852 V1.2. In order to visualize the Vertical
Channel messages, the Vertical channel tab has been added to the IPC-HERMES-9852 events
under Messages. In this tab, the traffic on the HVC (Hermes Vertical Channel) with all running
sessions and the corresponding client systems can be viewed.
5.12 New Fiducial Type “Edge” Supported
Compatible mode: Complete
The new fiducial type “Edge” is supported. With this new fiducial type, it is possible to define the
run of an edge, which is useful for LED alignments. The fiducial is visualized as a hatched line, as
shown in the following icon:
5.13 Inspecting Components After Placement at Too High Speed
Compatible mode: Complete
If the PCB description is incorrect or if there are bends in the PCB, the nominal position of the PCB
top edge might deviate distinctly. The component might therefore be placed at too high speed, and
consequently, get damaged.
If such an event occurs, the respective placement position is set to “inspect” and the error
40084 Component on board is possibly damaged is displayed. The error provides images from
the PCB camera of the component at the placement position and at the nozzle which can be used
to inspect the component for damages. The error can be solved with one of the following options:
– Component is not damaged: continue producing
– Component is damaged: skip panel
– Component is damaged: cancel board