00198765-02_VD_SSW_713.1_R20-1_EN_DE - 第25页
Station Software 713.1 (R 20-1) / V ersion Description 05/2020 Edition 25 6 Hardware Specifications 6.1 Supported Fee der Types The following feeders are support ed by the 713.1 stat ion software version: Feeder Modules …
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
24
5.11 Changes With HERMES-IPC-9852 Version 1.2
Compatible mode: Complete
The station software fully complies with HERMES-IPC-9852 V1.2. In order to visualize the Vertical
Channel messages, the Vertical channel tab has been added to the IPC-HERMES-9852 events
under Messages. In this tab, the traffic on the HVC (Hermes Vertical Channel) with all running
sessions and the corresponding client systems can be viewed.
5.12 New Fiducial Type “Edge” Supported
Compatible mode: Complete
The new fiducial type “Edge” is supported. With this new fiducial type, it is possible to define the
run of an edge, which is useful for LED alignments. The fiducial is visualized as a hatched line, as
shown in the following icon:
5.13 Inspecting Components After Placement at Too High Speed
Compatible mode: Complete
If the PCB description is incorrect or if there are bends in the PCB, the nominal position of the PCB
top edge might deviate distinctly. The component might therefore be placed at too high speed, and
consequently, get damaged.
If such an event occurs, the respective placement position is set to “inspect” and the error
40084 Component on board is possibly damaged is displayed. The error provides images from
the PCB camera of the component at the placement position and at the nozzle which can be used
to inspect the component for damages. The error can be solved with one of the following options:
– Component is not damaged: continue producing
– Component is damaged: skip panel
– Component is damaged: cancel board
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
25
6 Hardware Specifications
6.1 Supported Feeder Types
The following feeders are supported by the 713.1 station software version:
Feeder Modules from ASM Assembly Systems
– 4 mm – 104 mm X-feeder
– 8 mm - 88 mm E (E-series only)
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE Glue Feeder
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– SIPLACE JTF-ML (TX-series only)
– SIPLACE JTF-ML2 (TX-series only)
– JTF-MW E (E-series only)
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– Stick feeder with X-adapter
– Stick feeder E
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5/WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Smart feeder X
Smart feeder Xi
Station Software 713.1 (R20-1) / Version Description 05/2020 Edition
26
Processing Modules from ASM Assembly Systems
– MeasuringFeeder X
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Linear Dipping Unit X
– Linear Dipping Unit 2 X
– Linear Dipping Unit E (E-series only)
– Splice sensor X-feeder
– Power Connector X
Modules from 3
rd
party suppliers
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE Multistick 60 AX
IPTE Multistick XL80 AX
– SEMO CRF80 tape feeder
Restrictions:
– For larger feeders, the camera is positioned very close to the edge of the travel range.
Therefore, only a part of the component might be visible during pickup position teaching.
6.2 Camera Systems and Component Ranges
Detailed information on the used camera systems and component ranges for the placement heads
can be found in the respective machine specifications and/or User Manuals of the placement
machines.