OM-1683-001_w - 第11页
Safe-2 OM-1683 Safety Precautions 1 103-001 2. Alert Indications in Instruction Manual The following summarizes the precautionary items and the location of alert indications in the instruction manual. Alert Indications d…
Safe-1
OM-1683
Safety Precautions
1103-001
"Safety Precautions" describes the precautionary items that should be kept to prevent
personal injury or property damage beforehand and use the machine safely.
Before using this machine, please understand the contents of the following safety
precautions.
1. About Safety Precaution Labels
The safety precautions are expressed, using the combinations of safety alert symbols
"
" and headwords such as "DANGER", "WARNING", or "CAUTION" according to
the degree of danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols "
" are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid
any possibility of injury or death.
DANGER
This indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal word is
limited to the most extreme situations.
WARNING
This indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Aprecautionaryitemidentiedas"
CAUTION" may also lead the operator
to reach a serious result. To avert a serious result, please respect the described
cautions.
NOTICE
This indicates a potentially hazardous situation which, if not
avoided, may result in property damages.
1. About Safety Precaution Labels
Safe-2
OM-1683
Safety Precautions
1103-001
2. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " "
Alert Description Related Items
Only a well-trained service person should perform maintenance
tasks
carefullythroughthespeciedprocedures.
13.1.1
Before maintenance work, shut off the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
13.1.1
Alert Indications described as " "
Alert Description Related Items
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
inside
themachine.Avoidhandandngerinjuries.
7.1
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
13.1.1
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servoamplier go "OFF" in 10 minutes or
more after the power breaker is set to "OFF".
13.1.1
2. Alert Indications in Instruction Manual
WARNING
CAUTION
Safe-3
OM-1683
Safety Precautions
3. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
View
(2)
(1)
(2)
(1)
10-0252-
F1X1
1103-001
3. Alert Labels