OM-1683-001_w - 第12页
Safe-3 OM-1683 Safety Precautions 3. Alert Labels The alert labels (described below) are used for this machine. Please read the instructions on each label carefully and check the contents, observing the actual object. Be…
Safe-2
OM-1683
Safety Precautions
1103-001
2. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " "
Alert Description Related Items
Only a well-trained service person should perform maintenance
tasks
carefullythroughthespeciedprocedures.
13.1.1
Before maintenance work, shut off the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
13.1.1
Alert Indications described as " "
Alert Description Related Items
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
inside
themachine.Avoidhandandngerinjuries.
7.1
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
13.1.1
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servoamplier go "OFF" in 10 minutes or
more after the power breaker is set to "OFF".
13.1.1
2. Alert Indications in Instruction Manual
WARNING
CAUTION
Safe-3
OM-1683
Safety Precautions
3. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
View
(2)
(1)
(2)
(1)
10-0252-
F1X1
1103-001
3. Alert Labels
Safe-4
OM-1683
Safety Precautions
1103-001
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servoamplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(2)
10-0252-
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
3. Alert Labels