OM-1683-001_w - 第13页
Safe-4 OM-1683 Safety Precautions 1 103-001 Alert Labels and Description No. Alert Labels and Description (1) Description This label indicates that high voltage is applied to the area. Residual voltages may remain behi…
Safe-3
OM-1683
Safety Precautions
3. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
Location of Alert Labels
The alert labels are afxed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
View
(2)
(1)
(2)
(1)
10-0252-
F1X1
1103-001
3. Alert Labels
Safe-4
OM-1683
Safety Precautions
1103-001
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servoamplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(2)
10-0252-
Description
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
3. Alert Labels
OM-1683
Cont-1
Contents
Page
1103-001
Before Use ............................................................................................ 1
Caution and Warning ............................................................................ 3
Limited Warranty .............................................................................. 3
Installation/Transfer and After-Sale Service ..................................... 5
Requirements, Orientation, and Training for Operators ................... 5
AboutSpecicationChange ............................................................. 6
About Disposal of Machine .............................................................. 6
Other Precautionary Items ............................................................... 6
Safety Precautions
1. About Safety Precaution Labels ..................................................... Safe- 1
2. Alert Indications in Instruction Manual............................................ Safe-
2
Alert Indications described as "WARNING" ................................... Safe- 2
Alert Indications described as "CAUTION" ..................................... Safe- 2
3. Alert Labels .................................................................................... Safe- 3
Location of Alert Labels .................................................................. Safe- 3
Alert Labels and Description .......................................................... Safe- 4
Contents .............................................................................................. Cont- 1