OM-1683-001_w - 第47页

30 OM-1683 1 103-001 13.1 Outline of Maintenance (4) Syringe Maker : TERUMO This gun can be used for two types of greases. Use the syringes and the nozzle properly. Two Types of Greases : DAPHNE EPONEX GREASE No. 1 MOLYN…

100%1 / 83
29
OM-1683
1103-001
13.1 Outline of Maintenance
Speciedlubricationtools
(1) Brush
Use a brush whose bristles do not come off if possible.
Notice
Do not use a brush for ball screws and splines.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease or oil by hand.
(3)
Hand Grease Gun
Standard : KH-120
Part No. : 228A022
Maker
: Yamada Corporation
Note
Use this gun only for DAPHNE EPONEX GREASE No. 1.
Reference
Refer to the attached instruction manuals for the hand grease gun for the
usage.
Fig. 27
•
Attachment for Hand Grease Gun KH-120
Table 3
Standard Shape Part No. Remarks
Type H
216M0439 THK
SPK-3C
228A0021
Yamada
Corporation
Note
It is not attached to the machine. Purchase it separately if necessary.
30
OM-1683
1103-001
13.1 Outline of Maintenance
(4) Syringe
Maker : TERUMO
This gun can be used for two types of greases.
Use the syringes and the nozzle properly.
Two Types of Greases
: DAPHNE EPONEX GREASE No. 1
MOLYNOC GREASE AP1
Appearance
Fig. 28
Table 4
Standard Shape Part No. Remarks
Syringe
228A0171
Maker : TERUMO
10 ml SS-10-LZ
Nozzle No.19
(Color : Brown)
0916D108
Maker : NIPRO
Inside Diameter : f 0.79
Length : 65 mm Flat End
31
OM-1683
1103-001
13.1 Outline of Maintenance
13.1.3 Items for Periodic Maintenance
The items (inspection, cleaning, lubrication, etc.) that require periodic
maintenance are classied and described based on each individual devices.
Reference
Refer to "13.2 Maintenance Check List" for the maintenance based on frequency
of use.
Notice
The * -marks represent that the items require maintenance only for the
rsttime.
Followthe○-markedmaintenancecycleforthesubsequentuse.
Table 5
Device Name
Inspection Cleaning,
and Lubricating Spots
Work
Maintenance Cycle
Daily Weekly Monthly
Every
3 Months
Every
6 Months
Yearly
13.3.2.1 PCB Positioning
Section
Upper Serface of Backup
Table
Cleaning
Ball Screw
Cleaning,
Lubrication
*
Ball Screw Splines
Cleaning,
Lubrication
13.3.2.2 Conveyor
Section
Linear Guide
Cleaning,
Lubrication
*
Support Pin Detection
Sensors
Cleaning,
Lubrication
PCB Detection Sensor
Cleaning
PEC Detection Fiber
Cleaning
PEC Detection Fiber
Mirror
Cleaning