OM-1273-004_w - 第26页

Safety Precautions Safe-15 AJK-ML T-ID No. Alert Labels and Description (4) W ARNING Moving Mechanisms! Description  Pay attention to the moving mechanisms. Otherwise, you may be trapped by the moving mechanisms and a s…

100%1 / 213
Safety Precautions
Safe-14
AJK-MLT-ID
Alert Labels and Description
No. Alert Labels and Description
(1)
1-1
1-2
DANGER
High Voltage Area!
Avoid electric shock.
Description

This label indicates that high voltage is applied.
Do
not touch the labeled areas. Otherwise, you will be given an electrical
shock.
(2)
WARNING
Otherwise, an injury will result due
to breakage of the machine.
Stepping on Machine
Prohibited!
Description

Do not step on the machine. The machine may be damaged, causing you to fall
down from the machine and get injured.
(3)
WARNING
Trained Personnel Only!
Electric Shock or Hazardous Area
Description
Only the person who has nished operator training in the operation and
maintenance of the machine should touch the machine. Otherwise, any person other
than the trained one will be given an electrical shock or suffer an injury or a serious
accident.
0706-002
Safety Precautions
Safe-15
AJK-MLT-ID
No. Alert Labels and Description
(4)
WARNING
Moving Mechanisms!
Description
Pay attention to the moving mechanisms. Otherwise, you may be trapped by the
moving mechanisms and a serious accident will result.
(5)
WARNING
Keep the door closed during
operation.
Otherwise, part of your body may be trapped
in the moving mechanisms, causing an injury.
Do not keep the door open during operation.
Description
Do not open the door while the multi-layer tray feeder is running. Otherwise, the
magazine will pop out, leading to a serious accident.
(6)
Prevent fingers
being pinched.
WARNING
Description
Pay special caution not to get your ngers trapped. Otherwise, your ngers will get
injured and a serious accident will result.
0706-002
Safety Precautions
Safe-16
AJK-MLT-ID
5. Precautionary Items for Correct Operations
Requirements for Installation
Besuretofulllthefollowingrequirementsforsafetypurposes.
•
Overvoltage Category : Category
I
II
•
Pollution Degree : 3
Overvoltage Categories refer to the level of Impulse Withstand
Voltage protection
provided at the specied Pollution Degree.
Category I
I
I
: Primary circuits of a device to which power is directly
supplied from the power distribution panel, and circuits from
the distribution panel to outlets.
Note
The term was changed from "Installation Category" to "Overvoltage
Category".
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 3: Conductive pollution or dry nonconductive pollution
that becomes conductive due to condensation occurs.
To be found in industrial environment or construction
sites (harsh environments).
0706-002