OM-1273-004_w - 第51页
1-14 AJK-ML T-ID (2) Ready Switches (Magazine #1 Ready , Exchange Position Ready , Magazine #2 Ready Switches) The machine is equipped with doors and ready switches ("Magazine #1", "Exchange Position"…
1-13
AJK-MLT-ID
0706-002
3.2 Elevator
The elevator is provided with a mechanism that moves the magazines up and
down.
The elevator can be loaded with two magazines in which the pallets are
stored. Each magazine is driven up and down separately.
The trays on the pallets in each magazine can be replenished with
components or the trays on each pallet can be reloaded with components at
the specied position.
The magazines can manually be attached to or detached from the elevator.
The magazine loaded on the elevator is clamped with a spring force and
positioned in place.
Lower [ALL CHANGE] Button and
Step No. Buttons ([1] through [15])
Elevator Power LED
Upper [ALL CHANGE] Button and
Step No. Buttons ([1] through [15])
Fig. A5
(1) Elevator Power LED
This LED indicates whether or not the elevator is powered.
When the elevator is powered, the LED illuminates.
3.2 Elevator
1-14
AJK-MLT-ID
(2) Ready Switches
(Magazine #1 Ready, Exchange Position Ready, Magazine #2 Ready
Switches)
The machine is equipped with doors and ready switches ("Magazine #1",
"Exchange Position", and "Magazine #2") at each individual magazine
exchange and component supply positions.
The LED of each ready switch indicates the following.
•
When the LED illuminates in green, it indicates that the door is
electromagnetically locked, making it impossible to be opened.
•
When the LED is ickering in green, it indicates that the magazine is
moving toward the change position.
•
When the LED is turned off, it indicates that the door is not locked
and can be opened.
(3) Step No. Buttons [1] through [15] and [ALL CHANGE] Button
Provided on the inner sides of Magazine #1 and #2 Doors are Step No.
buttons ([1] through [15]) and the [ALL
CHANGE] buttons. Each Step No.
can be referred to for checking if a tray is inserted or not.
•
When the LED illuminates in green, it indicates that the step of the
corresponding No. is loaded with components.
•
When the LED is ickering in green, it indicates that the step of the
corresponding No. is short of components.
•
When the LED is turned off, it indicates that no step data is specied
in the pattern program.
When the step in a component shortage error (ickering LED of the step No.
button) is reloaded with components and the corresponding step No. button
is pressed, the LED illuminates in green.
When several step in component shortage errors are reloaded with
components and the [ALL CHANGE] button is pressed, the LEDs of the
corresponding step Nos. are turned on.
Note
When MG-G110 is used, Step No. Buttons ([11] through [15]) will not be
used.
The lamps of Step No. Buttons [11] through [15] are always turned OFF.
0706-002
3.2 Elevator
1-15
AJK-MLT-ID
3.3 Magazines
The magazines are provided with a mechanism that install the pallets
(the pallets loaded with trays). By replacing a magazine with another one
(loaded fully with components), the feeder can be loaded collectively with
components.
The following two types of magazines can be selected according to the
overall thickness of component.
•
Case : "Overall Thickness ≤ 8 mm"
15-Step Magazine (15 pallets/1 magazine), 12 mm Pitch
•
Case : "8 mm < Overall Thickness ≤ 14 mm"
10-Step Magazine (10 pallets/1 magazine), 18 mm Pitch
The pallet can be used commonly for both types of magazines.
In addition, when the steps above the pertinent pallet are left emptied
according to the overall thickness of component, up to 30 mm (overall
thickness of component) can be handled.
Overall Thickness of Component
30 mm or less
(One Step Emptied)
15-Step Magazine (MG-G115) 10-Step Magazine (MG-G110)
Overall Thickness
of Component
14 mm or less
Overall Thickness
of Component
8 mm or less
Overall Thickness
of Component
20 mm or less
(One Step Emptied)
Overall Thickness of Component
30 mm or less
(Two Steps Emptied)
Fig. A6
•
Total Mass (Full Capacity) of Magazine
The total mass is 40 kg (determined by the formula "(Weight of Pallets +
Components in Trays)
×
Number of Steps").
3.3 Magazines
0706-002