OM-1273-004_w - 第73页
2-8 AJK-ML T-ID 2.2.2 T ray Component Data When the [T ray Comp. Dt] button is pressed in the "COMP . RELD." window , the "T ray Comp. Dt" window appears. [1] [2] Fig. B5 "T ray Comp. Dt" Wi…
2-7
AJK-MLT-ID
[5]
[6]
[7]
Fig. B4 "Block Information" Window
[5] "Block Information" Sheet
Shown is the block information.
[6] Tray Pickup Matrix Setting Buttons
Shown is the tray pickup matrix data.
When the [Edit] button is pressed, an input window opens, making it
possible to set the tray pickup matrix data.
Note
As for the blocks that are not used in the pattern program, no tray
pickup matrix setting button is displayed.
[7] [Return] and [Set] Buttons
[Set] Button :
When pressed, this button sets the edited tray
pickup matrix data and opens the tray pickup matrix
editing window.
[Return] Button :
When pressed, this button cancels the selection
of the tray pickup matrix data and opens the tray
pickup matrix e
diting window.
2.2 Component Reloading
0804-003
2-8
AJK-MLT-ID
2.2.2 Tray Component Data
When the [Tray Comp. Dt] button is pressed in the "COMP. RELD."
window, the "Tray Comp. Dt" window appears.
[1]
[2]
Fig. B5 "Tray Comp. Dt" Window
[1] Information Display
Shown is the tray component data.
[2] "# of PCB Alarm for Shortage of Comp." Group Box
Set the number of PCBs to issue a component shortage alarm.
The [Edit] button can be used to set an arbitrary number of PCBs.
2.2 Component Reloading
0804-003
2-9
AJK-MLT-ID
2.3 Operation
When the [OPERATION] button on the "AUTO OPN" submenu bar is
pressed, the "OPERATION" window appears.
Fig. B5-1 "OPERATION" Window
The "OPERATION" window is composed of the "Run Mode", "Altn Mode",
"Opn. Mode", "Test Mode", and "Splicing Mode" windows.
2.3 Operation
0804-003