00196376-0102_UM S-Feeder_EN - 第31页
Tape Feeder Modules Removing the Tape Oper ating Tape Feeders - General User Manual SIPLACE S-Feeder 31 2.1.5 Removing the Tape Feeders with one track (1 2/16 mm S to 88 mm S) NOTICE This description applies to all S fee…
Tape Feeder Modules
Operating Tape Feeders - General Positioning the Tape to the Pickup Position
30 User Manual SIPLACE S-Feeder
Tape positions for 24/32 mm – 88 mm S feeders
1 Tape position for 24/32 mm S feeders 3 Component center
2 Tape position for components 44-88 mm 4 Centering position
Tape Feeder Modules
Removing the Tape Operating Tape Feeders - General
User Manual SIPLACE S-Feeder 31
2.1.5 Removing the Tape
Feeders with one track (12/16 mm S to 88 mm S)
NOTICE
This description applies to all S feeders with the exception of
8mmSII
feeders. This exception
is described separately directly after the following description.
Legend:
1 Toothed wheel for foil feed-in 4 Light barrier for foil removal
2 Rocker 5 Foil rocker
3 Cover tape
Tape Feeder Modules
Operating Tape Feeders - General Removing the Tape
32 User Manual SIPLACE S-Feeder
Feeders with three tracks (3x8 mm S* / SL)
►First press the foil rocker down as far as the end stop, to relieve some of the foil tension.
►Now press the rocker, hold it pressed and wait until the foil motor switches off.
►Pull the foil slightly out of the foil container.
►Cut the foil.
►Open the pickup window.
►Lift the tape perforations off the transport wheel.
►Pull the tape out of the tape feeder, towards the back.
Legend:
1 Rocker 3 Foil
2 Toothed wheel for foil feed-in 4 Foil rocker