00196376-0102_UM S-Feeder_EN - 第33页
Tape Feeder Modules Setting the Foil Pretension Operating Tape Feeders - General User Manual SIPLACE S-Feeder 33 2.1.6 Setting the Foil Pretension If the foil tears frequently or ha s not been correctly removed, you will…
Tape Feeder Modules
Operating Tape Feeders - General Removing the Tape
32 User Manual SIPLACE S-Feeder
Feeders with three tracks (3x8 mm S* / SL)
►First press the foil rocker down as far as the end stop, to relieve some of the foil tension.
►Now press the rocker, hold it pressed and wait until the foil motor switches off.
►Pull the foil slightly out of the foil container.
►Cut the foil.
►Open the pickup window.
►Lift the tape perforations off the transport wheel.
►Pull the tape out of the tape feeder, towards the back.
Legend:
1 Rocker 3 Foil
2 Toothed wheel for foil feed-in 4 Foil rocker
Tape Feeder Modules
Setting the Foil Pretension Operating Tape Feeders - General
User Manual SIPLACE S-Feeder 33
2.1.6 Setting the Foil Pretension
If the foil tears frequently or has not been correctly removed, you will need to set the foil pretension.
Example of how to set the foil pretension
The foil pretension is set with the setting screw (1) on the spring of the foil tensioner.
►If the foil pretension is too low (foil is not removed properly), increase the pretension by turning the
screw in a clockwise direction.
►If the foil pretension is too high (foil tears), reduce the pretension by turning the screw in an anticlock-
wise direction.
Legend:
1 Setting screw
2 Foil
NOTICE
When you release the screw, make sure that the spring slides back into place (especially when
the foil pretension was at its maximum before). If the spring does not slide back properly, the
foil pretension will not slacken.
Tape Feeder Modules
Operating Tape Feeders - General Emptying the Foil Container
34 User Manual SIPLACE S-Feeder
2.1.7 Emptying the Foil Container
Foil container
►Open the foil container flap (1) at the back of the feeder.
►If necessary, use a pair of tweezers to grip the foil (3) in the foil container.
►Carefully pull the foil out of the foil container, towards the back.
►Cut the foil.
►Close the flap.
Legend:
1 Foil container flap
2 Foil container
3 Foil
CAUTION
Do not tear off the foil as a "stretched" foil could lead to malfunctions at the foil removal point.
NOTICE
Empty the foil container each time you change the tape and each time you splice a tape.