00196376-0102_UM S-Feeder_EN - 第64页
Bulkcase Feeders Maintenance Cleaning the Component Duct on the Feeder Tracks 64 User Manual SIPLACE S-Feeder
Bulkcase Feeders
Cleaning the Component Duct on the Feeder Tracks Maintenance
User Manual SIPLACE S-Feeder 63
3.4.4 Cleaning the Component Duct on the Feeder Tracks
Component duct on the feeder track
►Loosen the 8 screws fastening the holddown.
►Remove the duct cover.
►Loosen the screw fastening the component stop (3).
►Remove the component stop.
►Loosen the screw fastening the light barrier (2).
►Pull the light barrier out until you can access the component duct.
Make sure that the cables and connections are not damaged.
►Clean the entire length of the component duct with alcohol.
Make sure that you do remove any of the labels attached to it.
►Now rub the cleaned component duct dry with a lint-free cloth.
►Fit the component stop so that it is positioned at the end of the duct (5).
►Fit the duct cover level with the funnel and position it against the holddown.
►Fit the feeder tracks back on the body.
Legend:
1 Holddown 4 Component duct
2 Light barrier 5 The component stop must lie against the component duct here.
3 Component Stop 6 Duct cover
Bulkcase Feeders
Maintenance Cleaning the Component Duct on the Feeder Tracks
64 User Manual SIPLACE S-Feeder
Linear Vibratory Feeder, Type 3
Function
User Manual SIPLACE S-Feeder 65
4 Linear Vibratory Feeder, Type 3
4.1 Function
The vibratory feeder is used for processing components in stick magazines.
The component stick magazines consist of profiles, which are available in the appropriate sizes for all
common components. When using a vibratory feeder, up to 3 tracks can be addressed by the placement
machine, depending on the size of the components.
The components are transported into the pickup position by a linear vibratory feeder.
4.2 Component Stick Magazines
Component stick magazine
Legend:
1 Raised pickup position
2 Red marking for refill monitoring
3 Refill opening outside the protective cover
4 Item number on the underside of the component stick magazine
5 Fixture aid on the underside, for precise positioning at the back
6 Fixing pin on the underside, for precise positioning at the front