00196376-0102_UM S-Feeder_EN - 第73页
Linear Vibratory Feeder, Type 3 Fitting Component Stick Magazines onto the Feeder Operating the Vibratory Feede r User Manual SIPLACE S-Feeder 73 Legend: Rear fixture position 1 Position fo r narrow a nd medium wide comp…
Linear Vibratory Feeder, Type 3
Operating the Vibratory Feeder Fitting Component Stick Magazines onto the Feeder
72 User Manual SIPLACE S-Feeder
4.3.2 Fitting Component Stick Magazines onto the Feeder
►Insert the stick magazine from the back onto the corresponding position on the vibratory feeder.
(1) Make sure that the stick magazine engages properly at the back of the vibratory feeder, in the
appropriate position for that magazine and then push the stick magazine from the back forwards, as
far as the end stop.
►(2) Open the vibrator flaps.
►(3) Fit the stick magazine onto the front of the vibratory feeder.
Make sure that the centering pin of the stick magazine engages in the corresponding recess, for that
magazine, on the vibratory feeder.
NOTICE
Vibratory linear feeders are suitable for operation with one stick magazine or two/three stick
magazines in a parallel arrangement. Make sure that the component stick magazines are
always fixed correctly at the back and front, in the correct position.
Component stick magazines of varying heights and widths can be fitted parallel to one another
on the same body. However, the vibrator flaps will need to be adjusted accordingly.
Linear Vibratory Feeder, Type 3
Fitting Component Stick Magazines onto the Feeder Operating the Vibratory Feeder
User Manual SIPLACE S-Feeder 73
Legend:
Rear fixture position
1 Position for narrow and medium wide component stick magazines
2 Position for narrow and wide component stick magazines
3 Position for narrow and medium wide component stick magazines
Front fixture position
4 Position for medium wide component stick magazines
5 Position for medium wide component stick magazines
6 Position for narrow component stick magazines
7 Position for narrow and wide component stick magazines
8 Position for narrow component stick magazines
Linear Vibratory Feeder, Type 3
Operating the Vibratory Feeder Cleaning the Component Stick Magazines
74 User Manual SIPLACE S-Feeder
4.3.3 Cleaning the Component Stick Magazines
To ensure smooth component transport, make sure you clean the stick magazines at regular intervals
with a lint-free cloth and alcohol.